TY - JOUR ID - TI - The validity of limestone rocks belonging to the Pila Spi and Sinjar formations within the Bazian fold / Sulaymaniyah governorate for riprap purposes صلاحية الصخور الكلسية العائدة لتكويني بلاسبي وسنجار ضمن طية بازيان/محافظة السليمانية لأغراض التكسية AU - Maher Najm Abdullah, ماهر نجم عبدالله, AU - Mohammed Rashid Abood, أميرة إسماعيل حسين, AU - Amera Ismael Hussain محمد راشد عبود PY - 2022 VL - 27 IS - 2 SP - 34 EP - 37 JO - Tikrit Journal of Pure Science مجلة تكريت للعلوم الصرفة SN - 18131662 24151726 AB - The study aims to know some of the physical and mechanical properties of limestone rocks within the Pila Spi and Sinjar Formations at the southwestern limb of Bazian Fold within the Sulaymaniyah Governorate, in order to show their suitability as riprap stones. The tests showed that the values of the dry density of these rocks ranged between (1.857-2.341) g/cm³, the water absorption rate ranged from (1.848-9.87)%, and the specific weight ranged from (2.167-2.255), and the values of the chemical erosion ratio ranged between (8.9-29)%. After knowing the physical and mechanical properties of these limestone rocks and comparing them with the standard specifications of the riprap stones, it was found that these rocks are not suitable for riprap purposes in all the stations of the study area most of the stations of the study area.

تهدف الدراسة إلى معرفة بعض الخواص الفيزيائية والميكانيكية للصخور الكلسية ضمن تكويني بيلا سبي وسنجار في الطرف الجنوبي الغربي لطية بازيان ضمن محافظة السليمانية لبيان مدى صلاحيتها كأحجار تكسية. وقد أظهرت الفحوصات إن قيم الكثافة الجافة لهذه لصخور تتراوح بينg⁄cm³ (1.857-2.341) ونسبة امتصاص الماء تتراوح من (1.848-9.87)% والوزن النوعي من (2.167-2.255) وتراوحت قيم نسبة التآكل الكيميائي بين (8.9-29)%. وبعد معرفة الخواص الفيزيائية والميكانيكية لهذه الصخور الكلسية ومقارنتها مع المواصفات القياسية لأحجار التكسية وجد ان هذا الصخور غير صالح لأغراض التكسية في اغلب محطات منطقة الدراسة. ER -