TY - JOUR ID - TI - Preparation and study of the Structural, Morphological and Optical properties of pure Tin Oxide Nanoparticle doped with Cu تحضير ودراسة الخصائص الهيكلية، الشكلية والبصرية لجسيمات نانوية من اوكسيد القصديرالنقي ومخدرCu AU - Duha S. Shaker ضحى سعد شاكر AU - Nada K. Abass ندى خضير عباس AU - Ruqayah A. Ulwall رقية عبد الولي عبد الله PY - 2022 VL - 19 IS - 3 SP - 660 EP - 669 JO - Baghdad Science Journal مجلة بغداد للعلوم SN - 20788665 24117986 AB - In this study, pure SnO2 Nanoparticles doped with Cu were synthesized by a chemical precipitation method. Using SnCl2.2H2O, CuCl2.2H2O as raw materials, the materials were annealed at 550°C for 3 hours in order to improve crystallization. The XRD results showed that the samples crystallized in the tetragonal rutile type SnO2 stage. As the average SnO2 crystal size is pure 9nm and varies with the change of Cu doping (0.5%, 1%, 1.5%, 2%, 2.5%, 3%),( 8.35, 8.36, 8.67, 9 ,7, 8.86)nm respectively an increase in crystal size to 2.5% decreases at this rate and that the crystal of SnO2 does not change with the introduction of Cu, and SEM results of the pure and doped confirmed that the particle size is within the range (25-56)nm within the nanosize. UV-Vis studies of reflection spectroscopy revealed that energy of band gap increased with increasing doping ratios (4.33,4.18 ,4.21, 4.21 4.23,4.35) ev For pure and doped with Cu (0.5%, 1%, 1.5%, 2%, 2.5%, 3%) respectively. Results of AFM show roughness rate, SPM and grain size of pure samples doped with Cu where the roughness rate of SnO2 is (3.04, 25,27,16,41.8,23.6,25.2) nm and average diameter is (98.9, 72.56 ,92.91, 88.38, 76.79, 70.94, 71.21) nm for pure and doped with Copper (0.5%, 1%, 1.5%, 2%, 2.5%, 3%) respectively.

في هذه الدراسة، تم تصنيع جزيئاتSnO2 النانويه النقيه والمشوبة بالنحاس بواسطة طريقه الترسيب الكيميائي . تم استخدام SnCl2.2H2O , CuCl2.2H2O كمواد خام . تم تلدين المواد عند°C 550 لمدة 3ساعات من اجل تحسين التبلور. اظهرت نتائج حيود الاشعه السينية ان العينات تبلورت في طورمن نوع رباعي الروتيل , SnO2 نظرا ان متوسط الحجم البلوري لSnO2 النقي 9 نانومتر ويختلف مع تغير منشطات النحاس (0.5%, 1%, 1.5%, 2%, 2.5%, 3%) , ، ( 8.35 ,8.36 ,8.67 , 9,7 ,8.86) نانومتر على التوالي والتركيب البلوريSnO2 لا يتغير مع ادخال النحاس , أكدت نتائج SEM للنقاوة والمخدر أن حجم الجسيمات يقع في نطاق (25-56) نانومتر داخل الحجم النانوي .كانت دراسات UV-ViS حيث كشف التحليل الطيفي للانعكاس ان طاقه فجوة النطاق تزداد مع زيادة نسب المنشطات (4.18,4.33 ,4.21 , 4.21 4.35,4.23 ) الكترون فولت للنقي والمشوب بالنحاس ( (0.5%, 1%, 1.5%, 2%, 2.5%, 3%) على توالي . واظهرت نتائج AFM معدل الخشونة، SPMوحجم الحبوب للعينات النقيه والمشوبة وان معدل الخشونة نانومتر و (3.04, 25,27,16,41.8,23.6,25.2) ومعدل القطر (98.9, 72.56,92.91, 88.38, 76.79, 70.94, 71.21) نانومتر للنقي والمشوب على التوالي. ER -