@Article{, title={Characterization of Metal Dispersion of Some Naphtha Reforming Catalysts by Methylcyclohexane Dehydrogenation Reaction تشخيص تشتت المعدن لبعض العوامل المساعدة المستخدمة في تهذيبالنافثا بتفاعل إزالة الهيدروجين لمثيل سيكلو هكسان}, author={Ameel Mohammed Rahman اميل محمد رحمن and Ahmed J. Ali احمد جواد علي}, journal={Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية}, volume={5}, number={3}, pages={77-86}, year={2009}, abstract={The dispersion of supported Pt and Pt–Ir reforming catalysts have been studied, after treatment with oxidative and reducing atmosphere. Methylcyclohexane dehydrogenation reaction in the absence of hydrogen was used as a test reaction. An attempt was made to relate the behavior of the catalysts upon subject to reaction, to the dispersion of the same type of catalysts upon treatment with similar atmosphere and temperatures which appeared in literature. The total conversion of reaction can be explained by a change in metal dispersion. Thus, methylcyclohexane dehydrogenation reaction appears to be a really “structure sensitive” reaction.
The toluene yield increases as the oxidation temperature increases over the studied catalyst RG-402, RG-412, RG-422 and RG-432 respectively and reached a maximum value at 550°C. Above 550 the conversion decreases due to the effect of catalyst sintering.
No significant change were observed for reduction temperature range 400-600°C for the above studied catalysts.
The selectivity order for the studied catalysts and for reduction treatment experiments arranged as follows:
RG-422> RG-432> RG-412> RG-402

تم دراسة انتشار المعدن Pt وPt-Ir المحملة على العوامل مساعدة RG-402، RG-412، RG-422 وRG-432 التي تستخدم لتهذيب النافثا بعد إجراء عمليات الأكسدة و الاختزال بضغط جوي اعتيادي. استخدم تفاعل إزالة الهيدروجين لمثيل سيكلو هكسان بغياب الهيدروجين كتفاعل اختبار لهذه الدراسة. جرت محاولة ربط تصرف العوامل المساعدة المستخدمة لهذا التفاعل لتوضيح تأثير تشتت المعدن جراء معاملته بعمليات الأكسدة والاختزال الموضحة في الأدبيات. يمكن التعبير عن التحول الكلي بالتغير الذي يحدث لتشتت المعدن. وبهذا يمكن القول بان تفاعل تحول Methylcyclohexane هو تفاعل حساس بتغير بنية العامل المساعد.لوحظ ان نسبة إنتاج التلوين تزداد بزيادة درجة حرارة الأكسدة للعوامل المساعدة المستخدمة لتصل الى أعلى معدلاتها عند درجة حرارة 550°م. وبارتفاع درجة الحرارة لوحظ ان نسبة الإنتاج يتناقص إشارة الى ظاهرة تلبد العامل المساعد. لم يلاحظ أي تغير في نسب إنتاج التلوين عند اختزال العوامل المساعدة بدرجات حرارية تراوحت من 400-600°م. يمكن التعبير عن انتقائية العوامل المساعدة المستخدمة بالترتيب التالي: RG-422> RG-432> RG-412> RG-402} }