TY - JOUR ID - TI - Dewaxing of Distilate Oil Fraction (400 – 500 ºC) Using Urea AU - Safaa R.Yasin AU - Abdul-Halim A.K. Mohammed PY - 2007 VL - 13 IS - 1 SP - 1268 EP - 1281 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - De-waxing of lubricating oil distillate (400-500 ºC) by using urea was investigated in the present study. Lubricating oil distillate produced by vacuum distillation and refined by furfural extraction was taken from Al-Daura refinery. This oil distillate has a pour point of 34 ºC. Two solvents were used to dilute the oil distillate, these are methyl isobutyl ketone and methylene chloride. The operating conditions of the urea adduct formation with n-paraffins in the presence of methyl isobutyl ketone were studied in details, these are solvent to oil volume ratio within the range of 0 to 2, mixer speed 0 to 2000 rpm, urea to wax weight ratio 0 to 6.3, time of adduction 0 to 71 min and temperature 30-70 ºC). Pour point of de-waxed oil and yield of wax produced were determined to show the effect of these operating conditions. The most favorable operating conditions were solvent to oil volume ratio of 1, mixer speed of 1500 rpm, urea to wax weight ratio of 5, time of adduction of 13 min and temperature of 30-52 ºC.

يتناول هذا البحث عملية إزالة الشمع من مقطر زيت التزييت باستخدام اليوريا. مقطر زيت التزييت الذي تم التعامل معه في هذا البحث مأخوذ من مصفى الدورة والمنتج بواسطة التقطير التجزيئي تحت الضغط المخلخل ( vacuum distillation ) والمعالج بطريقة الاستخلاص بالفورفورال( furfural extraction). هذا المقطر الزيتي له حدود درجة غليان بين 400 – 500 ْم ونقطة انسكاب 34 ْم. تم استخدام مذيبين لغرض تخفيف مقطر زيت التزييت هما مثيل ايزوبيوتيل كيتون ( methyl isobutyl ketone) وميثيلين كلورايد (methylene chloride ). الظروف التشغيلية لتفاعل اليوريا مع الشمع البارافيني المتواجد في مقطر زيت التزييت بوجود مذيب مثيل ايزوبيوتيل كيتون ( MIBK ) تم دراستها بالتفصيل, وهي نسبة حجم المذيب الى حجم الزيت ضمن حدود صفر– 2 ، سرعة الخلاط ضمن حدود صفر– 2000 دورةدقيقة ، نسبة وزن اليوريا إلى وزن الشمع الموجود في الزيت ضمن حدود صفر– 6.3 ، وزمن التبريد ( التفاعل) ضمن حدود صفر– 71 دقيقة, ودرجة الحرارة ضمن حدود 30– 70 ْم. درجة الانسكاب للزيت (pour point ) الناتج من عملية إزالة الشمع تم قياسها وكذلك النتاج ( yield ) للشمع المستخلص تم حسابه لغرض بيان تأثير الظروف التشغيلية آنفة الذكر. أفضل ظروف تشغيلية تم التوصل إليها هي نسبة حجم المذيب الى حجم الزيت بمقدار 1, سرعة الخلاط بمقدار 1500 دورةدقيقة , نسبة وزن اليوريا إلى وزن الشمع الموجود في الزيت بمقدار 5 , وزمن التبريد ( التفاعل) بمقدار 13 دقيقة , ودرجة الحرارة بمقدار 30– 52 ْم . ER -