@Article{, title={Design and Simulation of Power Factor Correction for AC/DC Converter}, author={Amina Mahmoud Shaker and Kais S. Ismail and Ali M. Salih}, journal={Journal of Engineering مجلة الهندسة}, volume={14}, number={2}, pages={2591-2605}, year={2008}, abstract={One of the biggest problems in power quality aspects is the harmonic contents in the electrical system. Most of the current harmonics are due to the nonlinear operation of the power converters and arc furnaces . These harmonics cause overheating of the magnetic cores of transformers and motors beside their effect on the torque –speed of the later . These problems have lead to the creation of design standards for purpose of limiting the allowable harmonics on the power lines, and hence to improve the power factor. This paper presents two types of power factor correction (PFC) for single phase AC/DC converter, the Boost converter and the Buck- Boost converter. The output of the Boost converter is fixed (400V , 3kW) while the output of the Buck – Boost converter is variable (150-400V, 3kW-1kW) and due to the discontinuous inductor current mode operation of the Buck mode of the Buck- Boost converter an average charge current control is used in the inner current loop control. From harmonic analysis the two types of converters has less harmonics as compared with the IEC1000-3-2 standards. The Buck Boost converter eliminates the problem of high inrush input current produced by the Boost converter type.

ان واحدة من اهم المشاكل الموجودة في المنظومات الكهـربائية هي توافـقيــات التـيار (Current Harmonics) وان اكثر هذه التوافقيات هي نتيجة عمل مغيرات القدرة اللاخطية (Non –Linear Operation of Converters ) وافران الشرارة .تولد هذهالتوافقيات حرارة فائقة في القلب المغناطيسي للمحولات بالاضافة الى تأثيرها على خواص العزم _ السرعة (Torque _ Speed) للمحركات و هذه المشاكل أدت الى أيجاد حدود قياسية لتحديد هذه التوافقيات في المنظومات الكهربائية وبالتالي تحسين عامل القدرة.ان مغيرات (Single Phase Buck – Boost Converter ) هي احدى مصادر هذه التوافقيات غير المرغوب فيها وهي تستخدم في بعض التطبيقات التي تحتاج الى خرج متغير(Variable Output) .لقد تم اقتراح (Buck- Boost Converter ) للفولتية ذو طور واحد بأدخال عام (230V- 85)و فولتية الخرج متغيرة من (150- 400V) ويتم التحكم بفولتية الخرج بأستخدام حلقتين، حلقة الفولتية الخارجية (Outer Voltage Loop) و حلقة التيار الداخلية (Inner Current Loop) بحيث يكون تيار الدخل وفولتية الدخل في طور واحد.وعندما يعمل المغير كخافض للفولتية فأن التيار الداخل يكون متقطع لذا تم اقتراح طريقة تحسس معدل الشحنة في حلقة التيار الداخلية (Charge Average Current Sensing) . ولقد تم ايجاد طريقة للتعديل في حلقة التيار الداخلية لتغيير الكسب (Gain) عندما تكون فولتية الخرج للمغير متغيرة.كما تم اقتراح دائرة لتحديد تيار البدء (Inrush Current ) بأستخدام طريقة الكشف عن قمة فولتية الدخل (Peak Input Voltage Detection) .تم احتساب توافقيات الدائرة المقترحة ووجد بأنها اقل بالمقارنة مع المواصفات القياسية كما ان كفاءة الدائرة اعلى في حالة الدخل العالي من الدخل الواطي.} }