@Article{, title={Experimental Investigation of Reinforced Concrete Flexural Beams Strengthened or Repaired with CFRP التحري العملي لعتبات الانثناء الخرسانية المسلحة المقواة أو المعاد تصليحها بال CFRP}, author={DAWLAT D. ALI and Nazar K. Al-Oukaili and Husain M. Husain}, journal={Journal of Engineering مجلة الهندسة}, volume={15}, number={3}, pages={3891 -3906}, year={2009}, abstract={Fiber reinforced polymers are typically comprised of high strength fibers (e.g. carbon and glass) impregnated with an epoxy (often termed the matrix). Experimental investigations of the behavior of reinforced concrete beams, strengthened or repaired by CFRP for flexural case have been presented in this paper. The experimental program consisted of 14 test beams. The study took into account strengthened and repaired cases in using CFRP; therefore, similar beams were used once for strengthening and once for repairing to make a comparison between them. All beams had been tested in a simply supported span and subjected to two-point loading while the main variable is the quantity, distribution and location of CFRP. The beams included additional anchorage at the ends of the main CFRP sheet reinforcement to prevent end separation of CFRP sheet. The results of experiments show that the use of CFRP as external strengthening has significant enhancement on ultimate load, crack pattern and deflection. It is observed that the use of external CFRP in strengthening or repairing beams could enhance the ultimate load capacity up to 160% over the capacity of the identical reference (untreated) beam.

الياف التقوية بالبوليمر تتالف بصورة مثالية من الياف عالية المقاومة (على سبيل المثال الكاربون او الزجاج) منغمسة بالايبوكسي. التحريات العملية لسلوك العتبة الخرسانية المسلحة المقواة او المعاد تصليحها بهذه الالياف لحالة انثناء العتبة تم تقديمها في هذا البحث. البرنامج العملي تالف من 14 عتبة فحص (عتبات انثناء) لدراسة اخذت بنظر الاعتبار حالتي التقوية واعادة التصليح لذلك صنعت عتبات متشابهه ستستعمل واحدة منها للتقوية واخرى لاعادة التصليح لعمل مقارنة بينهما. كل العتبات تم فحصها بفضاء بسيط الاسناد ومتعرضة الى نقطتي تحميل بينما المتغيرات الرئيسية كانت كمية توزيع وموقع شرائح الالياف. مجموعة عتبات الانثناء تضمنت تثبيت اضافي في نهايات صفيحة تقوية الCFRP الرئيسي لمنع اانفصال صفيحة CFRP . نتائج الفحوصات العملية بينت أن استعمال CFRP كتقوية خارجية له تاثير كبير على الحمل الاقصى، شكل التشقق والهطول. تم الاستنتاج بان استعمال الCFRP الخارجي في التقوية او اعادة تصليح عتبات الانثناء يمكن ان تعزز سعة الحمل الاقصى الى 160% من سعة العتبة المصدرية المثالية.} }