@Article{, title={The use of laurylamine hydrocholoride CH3(CH2)11 NH3 –Cl for secondary oil recovery استخدام كلوريد أمين لوريل لاستخراج النفط الثانوي}, author={Talib Abdullah Saleh طالب عبد الله صالح}, journal={Baghdad Science Journal مجلة بغداد للعلوم}, volume={9}, number={1}, pages={120-123}, year={2012}, abstract={Laurylamine hydrochloride CH3(CH2)11 NH3 – Cl has been chosen from cationic surfactants to produce secondary oil using lab. model shown in fig. (1). The relationship between interfacial tension and (temperature, salinity and solution concentration) have been studied as shown in fig. (2, 3, 4) respectively. The optimum values of these three variables are taken (those values that give the lowest interfacial tension). Saturation, permeability and porosity are measured in the lab. The primary oil recovery was displaced by water injection until no more oil can be obtained, then laurylamine chloride is injected as a secondary oil recovery. The total oil recovery is 96.6% or 88.8% of the residual oil has been recovered by this technique as shown in fig. (5). This method was applied in an oil field and it gave approximate values close to that obtained in the lab.

لقد تم اختيار كلوريد أمين لوريل من المحاليل فعالة السطح سالبة الشحنة (cationic) لاستخراج النفط الثانوي باستخدام موديل مختبري كما مبين في الشكل (1). درست العلاقة بين الشد البيني و(درجة الحرارة، الملوحة، وتركيز المحلول) كما مبين في الأشكال (2، 3، 4) على التوالي. أخذت أقصى القيم لهذه المتغيرات الثلاثة (تلك القيم التي تعطي أقل شد بيني). لقد تم قياس التشبع والنفاذية والمسامية في المختبر.لقد تمت الإزاحة الأولية للنفط عن طريق حقن الماء إلى أن توقف إنتاج النفط. وبعد ذلك تم حقن محلول كلوريد أمين لوريل إن إنتاج النفط الكلي هو 96.6% أو 88.8% من النفط المتبقي بهذه التقنية كما مبين في الشكل (5). تم تطبيق في حقل نفطي فأعطت نتائج مقاربة للنموذج المختبري.} }