TY - JOUR ID - TI - Reclamation and Reuse of Textile Dyehouse Wastewater by Elctrocoagulation Process AU - Hussain M. Flayeh PY - 2009 VL - 15 IS - 3 SP - 3985 EP - 3998 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - The present study investigates the removal of the textile dyehouse wastewater [azo dye para red(reactive dye)and M-5R200%(disperse oranges dye)] by Electrocaogulation process. The effect of nature of the anode, current density, initial pH, rate of stirring and concentration of dyes on the removal efficiency were tested.The experimental results showed that the color of dyes in the aqueous solution was effectively removed when aluminum was used as anodes and the current density 25mA/cm2 , initial pH (3-9),stirring rate 200rpm, and the concentration of dyes was less than 100mg/l. When the concentration of reactive dye exceeded 300mg/l iron was a more suitable anode than aluminum. For the electrocaogulation of disperse dye in aqueous solution aluminum as anode was more suitable than iron when the concentration exceeded 300mg/l. The removal efficiency of reactive dye was increased to 90% when using iron as anode and the removal efficiency of disperse dye 96% when aluminum was used as anode at different running time (10-30) minute.

يقدم هذا العمل مساهمة في تطوير تقنيات متقدمة واقتصادية لمعالجة فضلات المياه . حيث تم دراسة معالجة فضلات مياه مصنع نسيج ، باستخدام الطريقة الكهروكيميائية لإزالة اللون وباستخدام أقطاب الألمنيوم وحديد حيث تم بحث عملية التخثير الكهربائي ودراسة تأثير نوع القطب،كثافة التيار،الدالة الحامضية،معدل الخلط،وتركيز الملوث على كفاءة الإزالة.وقد وجد أن أفضل كفاءة لإزالة الملوث عند استخدام الألمنيوم كقطب انود تكون عند كثافة تيار 25 مليامبير/سم2 وقيمة الدالة الحامضية 3-9 ومعدل خلط 200 دورة بالدقيقة وتركيز ملوث(اللون) اقل من 100 ملغرام/لتر وعند زيادة تركيز الملوث عن 300 ملغرام/لتر يكون الحديد مناسب أكثر كقطب من الألمنيوم للون متفاعل كفاءة إزالة 90% ويكون الألمنيوم مناسب أكثر كقطب من الحديد للون متشتت كفاءة إزالة 96% بزمن تشغيل يتراوح بين (10-30) دقيقة. ER -