TY - JOUR ID - TI - Improving the Properties of Gypsum By Using Additives تحسين خواص الجص بإستخدام المضافات AU - Hadeel khalid Awad Al- Obaidi هديل خالد عواد العبيدي AU - NADA MAHDY ندى مهدي فوزي AU - Z. A. M. Raouf زين العابدين محمد رؤوف PY - 2012 VL - 18 IS - 1 SP - 1 EP - 18 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - Gypsum Plaster is an important building materials, and because of the availabilty of itsraw materials. In this research the effect of various additives on the properties of plaster wasstudied , like Polyvinyl Acetate, Furfural, Fumed Silica at different rate of addition and twotypes of fibers, Carbon Fiber and Polypropylene Fiber to the plaster at a different volumetricrate. It was found that after analysis of the results the use of Furfural as an additive to plasterby 2.5% is the optimum ratio of addition to that it improved the flexural Strength by 3.18%.When using Polyvinyl Acetate it was found that the ratio of the additive 2% is the optimumratio of addition to the plaster, because it improved the value of the flexural strength by a rateof 3.44% of the value of standards fraction of the mixture of reference. It was noted that theoptimum ratio for the addition of Fumed Silica to the plaster is the ratio of 1%, because thisratio of addition increases the flexural strength by 15.26%. For the addition of Carbon Fiberto the plaster it was found that the volumetric ratio of the additive 0.5% is the percentage ofperfect accessory after taking into account cost and quality which gives an increase inFlexural Strength by rate of 41.43% .When using Polypropylene Fiber it was found that theoptimum percentage ratio of addition 1.5%, where this ratio increases flexural strength by arate of 23.67% . When using the mixture (PVCF), which contains 2% of Poly vinyl Acetateand 0.5% as a volumetric rate of the carbon fiber to the plaster, increases the value of FlexuralStrength by a rate 62.92%. After analyzing the results for all mixtures it was found that themixture (PVCF) is the best one to satisfy the aim of the research which is to get the beststructural properties specially flexural strength for gypsum beams.

يعد الجص من المواد البنائية المهمة ويتوفر في العراق بكثرة لتوافر مواده الأولية ، وفي هذا البحث تم دراسة تأثيرإضافة مواد مختلفة مثل مادة البولي فنيل أستيت ومادة الفورفرال وأيضًا مادة الفيوم سليكا وبنسب إضافة وزنية مختلفةونوعين من الألياف هما ألياف الكاربون وألياف البولي بروبلين وبنسب إضافة حجمية مختلفة، وقد وجد عن طريقتحليل النتائج بأن النسبة المثلى لإضافة مادة الفورفرال إلى الجص هي 2,5 % من وزن الجص لأنها تحسن من خاصيةمعاير الكسر بنسبة 3,18 %، وبعمر ( 28 ) يومًا من المعالجة،وعند إستخدام مادة البولي فنيل أستيت وجد أن النسبةالمثلى للإضافة إلى الجص هي 2% من وزن الجص إذ تزيد من قيمة معاير الكسر بنسبة 3,44 %، ولوحظ أن النسبةالمثلى لإضافة مادة الفيوم سليكا إلى الجص هي نسبة 1% من وزن الجص وذلك لأن هذه النسبة من الإضافة تزيد منمعاير الكسر بنسبة 15,26 %،وعند إضافة ألياف الكاربون إلى الجص وجد أن النسبة المثلى للإضافة هي 0,5 % كنسبةحجمية من الجص بعد مراعاة الكلفة والجودة ، إذ تعطي هذه النسبة من الإضافة زيادة كبيرة في معاير الكسر وبنسبةالتي تحوي على 2% من مادة البولي فنيل أستيت و 0,5 % كإضافة حجمية (PVCF) %41,43 ،وعند إستخدام الخلطةمن ألياف الكاربون إلى الجص تزيد من قيمة معاير الكسر بنسبة 62,92 % وهي أفضل خلطة لتحقيق الهدف من البحثوهو الحصول على مواصفات إنشائية أفضل وخاصة لتحسين مقاومة الإنثناء للعتبات الجصية. ER -