TY - JOUR ID - TI - Investigation of Twisted Tape Turbulator for Fire Tube Boiler AU - Rashid K. Insayif AU - Karima E. Amori PY - 2011 VL - 17 IS - 4 SP - 694 EP - 713 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - The present work presents a new experimental study of the enhancement of turbulent convection heat transfer inside tubes for combined thermal and hydrodynamic entry length of one popular “turbulator” (twisted tape with width slightly less than internal tube diameter) inserted for fire tube boilers. Cylindrical combustion chamber was used to burn (1.6 to 7kg/h) fuel oil #2 to deliver hot gases with ranges of Reynolds number (10500 to 21700), and (11400 to 24150) for both empty and inserted tube respectively.A uniform wall temperature technique was used by keeping approximately constant water temperature difference (25ºC) between inlet and exit cooling water in parallel flow shell and tube heat exchanger. The test tube consisted of smooth carbon steel tube of (2400mm) long and (52mm) internal diameter. This test tube instrumented to derive local heat transfer coefficient and local flue gasses static pressure.The experimental results show that for the same fuel consumption, twisted tape insert with (H/D = 11.15) enhanced the mean Nusselt number in (75.2%), (68.8%), (49.8%), (40.3%), and (16.7%) for fuel consumption (7kg/h), (6.16kg/h), (4.5kg/h), (3.24kg/h), and (1.6kg/h) respectively.A set of empirical correlations that permit the evaluation of the mean Nusselt number (for developing and fully developed region), and average Nusselt number (for developed region) for empty and inserted tube are generated for engineering applications.

هذا البحث يقدم دراسة عملية جديدة لتحديد التحسين الحاصل في معامل انتقال الحرارة لغازات الاحتراق المارة داخل انابيب مراجل انابيب النار عند ادخال شريط معدني ملتوي بعرض يقل قليلا عن قطر الانبوب.تم تجهيز غازات الاحتراق من غرفة احتراق اسطوانية الشكل يتم فيها حرق كمية من الوقود السائل الخفيف رقم 2 تتراوح من (1.6 – 7 كغم/ساعة ) بحيث يعطي رقم رينولدز من ( 10500-21700) للانبوب الفارغ و(11400-24150) للانبوب المدخل فيه الشريط الملتوي.تمت المحافظة على درجة حرارة جدار الأنبوب منتظمة وذلك بالسيطرة على فرق 25 درجة مئوية بين درجة حرارة الماء الداخل والخارج في مبادل حراري نوع ( الغلاف والانبوب ) بجريان متوازي بطول انبوب 2400 ملم وقطر داخلي 52ملم . ربطت على هذا الانبوب مجموعة من اجهزة القياس التي ساعدت على حساب معامل انتقال الحرارة والضغط الاستاتيكي الموقعي على طول الانبوب .بينت نتائج الحسابات ان الشريط الملتوي يُحسن القيمة المتوسطة لرقم نسلت بمقدار (%75.2) ، (%68.8) ، (%49.8) ، (%40.3) ، (%16.7) لنفس الكمية من صرف الوقود (7. 6.16 4.5 3.2 1.6 كغم /ساعة ) على التوالي .تم استنتاج مجموعة من المعادلات لحساب القيمة المتوسطة لرقم نسلت على طول الانبوب فضلا عن احتساب قيمة متوسطة لرقم لنسلت في منطقة الجريان التام التطور للانبوب الفارغ والمدخل فيه الشريط الملتوي. ER -