TY - JOUR ID - TI - Removal of lead from simulated wastewater by electrocoagulation method AU - Muhanned Dhia Fadhil Al-Mureeb AU - Ahmed A.Mohammed PY - 2010 VL - 16 IS - 4 SP - 5811 EP - 5821 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - The separation of lead ions from wastewater was carried out in an electrocoagulation cell which has a set of electrodes, aluminum anode and stainless steel cathode. The effect of several working parameters such as pH, current density, initial lead concentration, electrodes surface area, gap between electrodes and sodium chloride concentration on the performance of electrocoagulation cell were examined. From the experiments found that the higher removal efficiency achieved at pH 9, with increasing current density and decreasing gap between electrodes the removal efficiency enhanced and the treatment time decreased. Using a flowrate of 0.025 l/min after (7min) electrolysis, the Pb(II) concentration decay from (250mg/l) to only (2.5mg/l) corresponding to a 99% removal efficiency.

آيونات ألرصاص في المياه الصناعية الملوثة فصلت داخل خلية التختير الكهروكيمياوي التي تحتوي على قطب انود من الألمنيوم وقطب كاثود من الحديد المقاوم للصدأ. عدة متغيرات والتي لها تأثير على كفاءة ألإزالة مثل الدالة الحامضية, كثافة التيار, تركيز الرصاص ألأولي, درجة الحرارة, تركيز كلوريد الصوديوم, المسافة بين ألأقطاب, المساحة السطحية للأقطاب ونوعيتها تم دراستها. من التجارب وجد ان أعلى كفاءة ازالة تتجقق عندما تكون الدالة الحامضية 9 , وبزيادة كثافة التيار التيار وتقليل المسافة بين ألأفطاب تتحسن كفاءة ألأزالة ويقل وقت المعالجة. كذلك وجد ان كفاءة ألأزالة تتحسن عند تقليل معدل الجريان. ER -