@Article{, title={Assessment of the ultrasonic machine for surface finishing of 3D-printed Cobalt-Chromium alloy by selective laser melting technology تحسين سطح سبيكه الكروم كوبالت بطرق تلميع مختلفه (دراسه مقارنه)}, author={Mahmood Abdulla Ahmad محمود عبدالله احمد and Israa Mohammed Hummudi اسراء محمد حمودي}, journal={Journal of Techniques مجلة التقني}, volume={4}, number={4 Special Issue}, pages={E128-E133}, year={2022}, abstract={Background: The selective laser melting (SLM) system reaches the status of a contender with the traditional casting of dental alloys, with the essential drawback that it is conducive to roughness, making surfaces difficult to finish by the conventional method. Ultrasonic machines (USM) are instrumentally sensible for processes involving metal surface adjustments.Purpose: This study aimed to assess the surface roughness for SLM by using USM instead of conventional finishing.Approach: The discs of cobalt chromium alloy were printed by SLM (n = 20) and evenly divided into two groups: one for finishing in compliance with the manufacturer's standard procedure, and the other for employing USM. The specimens were evaluated using the Surface Roughness Test, and the data was analysed using the t-test. Result: Highly significant differences were found at P < 0.01. Furthermore, the mean value accounted for a low level of readings (Ra) in the USM group, which amounted to 1.707, and with regard to the control group, it was 4.539.Conclusion: Ultrasonic finishing processes promote the competence of the finishing procedure and improve the surface quality for dental cobalt chromium alloys that are printed by SLM technology.

يضاهي نظام الذوبان الانتقائي بالليز(SLM) إلى حالة من التنافس مع الصب التقليدي لسبائك الأسنان مع انه موسوم بعيب اساسي للسطح الذي قد يفضي إلى الخشونة ، مما يجعل من الصعب على تشطيبها بالطرق العادية . أجهزة الموجات فوق الصوتية (USM)معقولة بشكل فعال للعمليات التي تنطوي على تعديلات سطح المعادن. تهدف هذه الدراسة إلى تقييم خشونة السطح لـ SLM باستخدام USM بدلاً من التشطيب التقليدي. تم طباعة أقراص عددها عشرين عينة من سبيكة الكروم الكوبالت بواسطة تقنية الذوبان الانتقائي بالليزر مقسمة بالتساوي إلى مجموعتين: واحدة لللتشطيب وفقًا للإجراء القياسي للشركة المصنعة، والأخرى بإستخدام الة الموجات الفوق الصوتية . تم تقييم العينات باستخدام اختبار الخشونة السطحية، ثم تحليل البيانات باستخدام T-Test . تم العثور على اختلافات ذات دلالة إحصائية . علاوة على ذلك، يمثل متوسط القيمة مستوى منخفضًا من القراءات (Ra) في مجموعة USM. في الختام، توصلت الدراسة على ان التشطيب بواسطة آلة الموجات الفوق الصوتية قد تؤثر في تقليل خشونة سطح السبيكة المطبوعة من خلال تقنية الذوبان بواسطة الليزر الانتقائي .} }