TY - JOUR ID - TI - Evaluation of Corrosion Inhibition of Carbon Steel in Crude Oil by Using Different Green Corrosion Inhibitors and Various Rotation Speeds تقييم تثبيط تآكل الكربون الصلب في النفط الخام باستخدام مثبطات تآكل خضراء مختلفة وسرع دوران مختلفة AU - Abbas K. Algburi عباس خليل ابراهيم PY - 2023 VL - IS - 38 SP - E97 EP - E117 JO - Journal of Petroleum Research & Studies مجلة البحوث والدراسات النفطية SN - 22205381 27101096 AB - Corrosion is a major problem in the petroleum industry, which often occurs to crude oil production equipment and to petroleum product transportation pipelines as well. In order to protect these parts from corrosion, much small quantities of inhibitors are constantly injected, which gradually formulate a fluffy layer of inhibitor over the metal surface so as to protect it from corrosion. Recently, the impact of corrosion inhibitors on the environment has been raising more attention and concern. New regulations related to environment have been designated, imposing a change in the use of toxic chemicals to the utilization of the so-called “green chemicals”. Experiments on carbon steel corrosion protection have been conducted in a medium of crude oil has an API gravity of 30.6 by using different concentrations, ranging between 100 – 400 ppm of different green inhibitors such as corn oil, sunflower oil, flaxseed oil and castor oil with a different rotation speeds, namely, 0, 500, 1250 and 2000 rpm. The weight loss outcomes have showed that the rate of carbon steel corrosion in the crude oil decreases with the rise of inhibitors’ concentration, while corresponds with the increase of the rotational speed. In addition, it was found that the maximum inhibition efficiency achieved for the inhibitors corn oil, sunflower oil, flaxseed oil and castor oil in crude oil was using a concentration of 400 ppm, a rotation speed of 0 rpm and an ambient temperature (25 °C) is 41.85%, 50.76%, 63.55% and 92.63%, respectively

يعتبر التآكل مشكلة رئيسية في الصناعة البترولية، والتي تحدث غالبًا في معدات إنتاج النفط الخام وفي أنابيب نقل المنتجات البترولية ايضاً. من أجل حماية هذه الأجزاء من التآكل، يتم حقن كميات صغيرة جدا من المانع باستمرار، والذي يشكل تدريجياً طبقة رقيقة من المانع على سطح المعدن لحمايته من التآكل. في الآونة الأخيرة، أثار تأثير مثبطات التآكل على البيئة مزيدا من الاهتمام والقلق. تم وضع لوائح جديدة تتعلق بالبيئية، وفرض تغييراً في استخدام المواد الكيميائية السامة الى استخدام بما يسمى "المواد الكيميائية الخضراء. تم أجراء تجارب لحماية الصلب الكربوني من التآكل في وسط من النفط الخام له API يبلغ 30.6 باستخدام تراكيز مختلفة تتراوح بين 100-400 جزء في المليون من مثبطات خضراء مختلفة مثل زيت الذرة وزيت عباد الشمس وزيت بذور الكتان وزيت الخروع مع سرع دوران مختلفة وهي 0، 500، 1250 و 2000 دورة في الدقيقة. أظهرت نتائج فقدان الوزن أن معدل تآكل الفولاذ الكربوني في الزيت الخام يتناقص مع زيادة تركيز المثبطات الخضراء، بينما يرتفع مع زيادة سرعة الدوران. بالاضافة الى ذلك، وجد ان أقصى كفاءة ثبيط تم تحقيقها لمثبطات زيت الذرة وزيت عباد الشمس وزيت بذور الكتان وزيت الخروع في النفط الخام كانت باستخدام تركيز 400 جزء في المليون وسرعة دوران صفر دورة في الدقيقة وعند درجة حرارة 25 م˚ وهي 41.85٪، 50.76٪، 63.55٪ و 92.63٪ على التوالي ER -