TY - JOUR ID - TI - Stiffness Characteristics of Pile Models for Cement Improving Sandy Soil by Low-Pressure Injection Laboratory Setup خصائص الصلابه لنماذج الركائز الناتجه عن حقن التربه الرمليه بالسمنت لتحسين خواصها بواسطه جهاز الحقن المختبري للضغوط الواطئه AU - Samir H. Hussein سمير حسب الله حسين AU - Mahmood D. Ahmed محمود ذياب احمد PY - 2023 VL - 29 IS - 3 SP - 154 EP - 169 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - Soil improvement has developed as a realistic solution for enhancing soil properties so thatstructures can be constructed to meet project engineering requirements due to the limitedavailability of construction land in urban centers. The jet grouting method for soilimprovement is a novel geotechnical alternative for problematic soils for which conventionalfoundation designs cannot provide acceptable and lasting solutions. The paper'smethodology was based on constructing pile models using a low-pressure injectionlaboratory setup built and made locally to simulate the operation of field equipment. Thesetup design was based on previous research that systematically conducted unconfinedcompression testing (U.C.Ts.). The soil improvement techniques were investigated byinjecting a low-pressure mixture of water and ordinary Portland cement (O.P.C.) with (0.8,1, and 1.3) W/C ratios. The study revealed the relationship between pile model samples(U.C.Ts.) and W/C ratios. It also showed that the pile model samples' (U.C.Ts.) resultdecreased from 14 to 12 to 10 MPa, respectively, with an increase in W/C ratios from 0.8 to1 and 1.3, respectively. Furthermore, the stiffness characteristics of a jet grouting columnwere calculated based on Mohr's Circles theory, and numerous theoretical approachesobtained the consequences of tensile strength.

قلة المتوفر من الا ا رضي الصالحه للبناء في م ا ركز المدن جعل من التطو رفي تقنيات تحسين التربه الحل المنطقي لتحسين خواصالتربه المتوفره لتتلائم اولمتطلبات الهندسيه اللازمه لجعل التربه قادره على تحمل المباني اولمنشاات التي ستقام عليها ..تعتبرطريقه الحقن البثقي طريقه جديده وبديله لحل مشاكل الترب التي تعاني من مشاكل تقنيه والتي لاتستطيع التصاميم التقليديهللاسس ان توفر لها حلول دائميه ومقبوله. ست ا رتيجيه البحث تتضمن انشاء نموذج ركائزمن خلال حقن التربه بخليط السمنتوالماء بواسطه جهاز الحقن المختبري المصمم لحقن التربه بضغوط واطئه. الجهاز صمم ليحاكي عمليه الحقن الفعليه التي تجريبواسطه المعدات الخاصه للحقن في مواقع العمل حيث تم تصنيعه في الاسواق المحليه اعتمادا على بحوث سابقه .الجهاز صممليتماشى مع منهجيه فحص الانضغاط غير المحصور. تم التحقق من عمليه تحسين التربه من خلال حقن التربه بخليط الماءمع السمنت البورتلاندي العادي باستعمال ثلاث نسبه مختلفه من خلط الماء بالسمنت هي ) 0.8,1,1.3 (.الد ا رسه كشفت العلاقهكما بينت ان قوه (W/C ratios( مع مختلف نسب خلط الماء بالسمنت (U.C.Ts.) بين مقاومه الانضغاط لنماذج الركائزالانضغاط لنماذج الركائز تقل من 14 الى 12 ثم الى 10 ميكاباسكال مع زياده نسبه خلط الماء بالسمنت من 0.8 الى 1 الى1.3 على التوالي كذلك تم حساب خصائص الصلابه لهذه الركائزباستخدام دائره مور ونتائج مقاومه الشد المستحصله من عدهفرضيات. ER -