@Article{, title={Influence of geometrical and operating conditions on the performance of the heat pipes: A review تأثیر الظروف الهندسیة والتشغیلیة على أداء الأنابیب الحراریة: مراجعة}, author={Zaher Raheem زاهر رحيم and Nabeel Dhaidan نبيل ضيدان and Fadhel Al-Mousawi فاضل الموسوي}, journal={Kerbala Journal for Engineering Sciences كربلاء للعلوم الهندسية}, volume={2}, number={3}, pages={172-191}, year={2022}, abstract={A heat pipe is one of the most effective devices for transferring heat from the heat source to the sink. It is a vacuum-tight device that depends on the phase-change conversion associated with highly effective thermal conductivity. A comprehensive review of experimental and numerical investigations related to the influences of the controlled geometrical parameters and operating variables on the thermal characteristics of heat pipes and thermosyphons is presented. These variables include the diameter and length of the heat pipe, working fluids, energy inputs, filling ratio, tilt angle, coolant flow rate, etc. The thermal features of the heat pipe is described by thermal coefficients and temperature differences through the condenser and evaporator, thermal efficiency, and thermal resistance. It is realized that the thermal resistance reduces, and the thermal coefficients increase with the amount of power input. In addition, the optimum values of tilt angles and fill ratios depend on the other controlled variables. However, the optimum filling ratio ranged from 15%-60%. While the best inclination angle was between 60° and 90°.

یعتبرالأنبوب الحراری من أکثر الأجهزة فعالیة فی نقل الحرارة بین مصدر الحرارة و مستقبل الحرارة. الانبوب الحراری عبارة عن جهاز محکم التفریغ ، ویعتمد على تغییر الطور (سائل-بخار) المرتبط بموصلیة حراریة عالیة الفعالیة. یتم تقدیم مراجعة شاملة للدراسات التجریبیة والعددیة المتعلقة بدراسة تأثیرات العوامل الهندسیة والمتغیرات التشغیلیة المتحکم بها على الخصائص الحراریة للأنابیب الحراریة والثرموسیفونات. تشمل هذه العوامل و المتغیرات قطر وطول الأنبوب الحراری، وموائع التشغیل، و الطاقة الداخلة الى المبخر ، ونسبة الملأ فی المبخر ، وزاویة المیل للانبوب الحراری ، ومعدل تدفق سائل التبرید ، وما إلى ذلک من العوامل التی یمکن التحکم بها. یتمیز السلوک الحراری لأنابیب الحرارة بمعاملات نقل الحرارة والاختلافات فی درجات الحرارة من خلال المکثف والمبخر والکفاءة الحراریة والمقاومة الحراریة. من خلال المراجعة, یتم إدراک أن المقاومة الحراریة تقل ، وتزداد المعاملات الحراریة مع کمیة الطاقة الداخلة. بالإضافة إلى ذلک ، تعتمد القیم المثلى لزوایا المیل ونسب الملء على المتغیرات الأخرى التی یتم التحکم فیها. ومع ذلک ، تراوحت نسبة الملء المثلى بین 15٪ -60٪. بینما کانت أفضل زاویة میل بین 60 درجة و 90 درجة.} }