TY - JOUR ID - TI - Dynamic Behavior of Machine Foundations on layered sandy soil under Seismic Loadings السلوك الديناميكي لأساسات ماكينة على طبقات من الترب الرملية تحت الأحمال الزلازلية AU - Abduljabbar A. Allawi عبدالجبار عادل علاوي AU - Qassun S. Mohammed قاسيون سعدالدين محمد PY - 2022 VL - 28 IS - 8 SP - 1 EP - 20 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - In this paper, a dynamic investigation is done for strip, rectangular and square machine foundationat the top surface of two-layer dry sand with various states (i.e., loose on medium sand and denseon medium sand). The dynamic investigation is performed numerically using finite elementprogramming, PLAXIS 3D. The soil is expected as a versatile totally plastic material that complieswith the Mohr-Coulomb yield criterion. A harmonic load is applied at the base with an amplitudeof 6 kPa at a frequency of (2 and 6) Hz, and seismic is applied with acceleration – time input ofearthquake hit Halabjah city north of Iraq. A parametric study is done to evaluate the influence ofchanging L/B ratio (Length=12,6,3 m and width=3 m), type of sand, and frequency of the machinefor soil with two layers (dense and medium sand) and (loose and medium sand). It was noticedthat the displacement decreases when the foundation is strip, and has the highest values when thefoundation is square. At the same time, the maximum vertical stress of the foundation (L/B = 4and L/B = 1) appears to be (1262) kPa and (1255) kPa, respectively, due to increasing thefoundation mass as a result of increasing its dimensions. Then again, the displacement increasesby 20% for vertical displacement when decreasing the relative density. In addition, it has beennoticed that there is a decrease in displacement when the frequency value changes from (2 to 6)

في هذا البحث ، تم وضع تحليل ديناميكي لأساس الماكينة الشريطي والمستطيل والمربع على السطح العلوي لرمل جافيتكونمن طبقتين بحالات مختلفة على سبيل المثال (مفكك على رمل متوسط وكثيف على رمل متوسط). حيث تم إجراء التحليلالديناميكييفُترض أن التربة مادة بلاستيكية مرنة تمامًا تخضعبسلوكها لمعيار .PLAXIS 3D عدديًا باستخدام برنامج العناصر المحدودةيتم تطبيق الحمل التوافقي في الأساس بسعة 6 كيلو باسكال بتردد( 2 و 6) هرتز ويتم تطبيق الحمل .Mohr-Coulombالزلزالي متمثلا بزلزال حلبجة شمال العراق. تم إجراء دراسة بارامترية لتقييم تأثير تغيير نسبة طول الاساس الىعرضه(نوع الرمل وقيمة تردد الماكينة للتربة ذات طبقتين (رمل كثيف ومتوسط ) و (رمل مفككومتوسط). ,) L=12,6,3 m , B=3 mاستنتج أن الإزاحة تقل عندما يقترب شكل الأساس من الشريطي، وتكون أعلى قيمه لها عندما يكون الأساس مربع.بينما وجد انالإجهاد الرأسي للأساس الشريطي اعلى عند مقارنته بالأساس المربع حيث أن قيم الإجهاد القصوى هي( 1262 )كيلو باسكال و(٪ 1255 ) كيلو باسكال على التوالي بسبب زيادة كتلة الأساس نتيجة زيادة أبعاده. ثم مرة اخرى, يزداد منحنىالإزاحة بنسبة 20بالنسبة للإزاحة الرأسية عند تقليل الكثافة النسبية. بالإضافة إلى ذلك ، لوحظ انخفاض الازاحة بنسبة 5٪عندما تتغير قيمة الترددمن( 2 إلى 6) هرتز . ER -