@Article{, title={Fatigue Study Of E-Glass Fiber Reinforced Polyester Composite Under Fully Reversed Loading And Spectrum Loading دراسة الكلال لمادة الليف الزجاجي المدعوم بالبولستر المصنعة عند التحميل (الشد- انضغاط) المعكوس والتحميل الطيفي}, author={Muhannad Z. Khelifa and Hayder Moasa Al-Shukri}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={26}, number={10}, pages={1210-1224}, year={2008}, abstract={Study of the fatigue behaviors experimentally and theoretically of a compositematerial manufactured for this paper by stacking four layers of E-glass fiber indifferent angle orientations (0o, ± 45o, 0o/90o) immersed in polyester resin with totalthickness 4 mm. They were tested under two types of dynamic loads in fully reversibletension-compression load at (R=-1) and spectrum load as fatigue testing, to estimate lifecurves and microscopic an examination was carried out for stress affected and fractureareas. Finite Element Analysis (FEA) using ANSYS Workbench™ was used toevaluate the composite behaviour under fatigue conditions. The results of the fatiguetest show that the uniaxial [04] composite has the highest strength and the fatiguedegradation is also the highest. The high magnification optical microscopy methodshows that the failure of laminas at ± 45oand 0o/ 90o is due to matrix failure in thedirection of the fiber, whereas for the unidirectional lamina at 0o, the failure is due tofiber breakages.

دراسة سلوك الكلال عمليا و نظريا لمادة مركبة مصنعة لهذا البحث مكونة من أربعة طبقات من الليف45 مغمور بمادة البوليستر وذات سمك كلي 4 o, 0o), ± ( 0o/90o الزجاجي و باتجاهات مختلفة الزوايا(R=- ملم وتم اختبارها تحت نوعين من الأحمال الديناميكية,حمل متعاكس (شد – انضغاط)عند ( 1وحمل طيفي كاختبار الكلال وذلك للحصول على مخططات العمر وكذلك أجراء الفحص ألمجهريللمناطق المعرضة للإجهاد والكسر.التحليل النظري بطريقة العناصر المحددة تم باستخدام برنامجوذلك لتقيم سلوك المادة المركبة في حالات اختبار ANSYS Workbench® الحاسبة الجاهزالكلال. أظهرت نتائج فحص الكلال إن نموذج المادة المركبة المصنعة ذات الاتجاه الواحد [ 04 ] لهااكبر قوة متانة وكذلك أعلى انحدار بالطاقة . أن طريقة الفحص ألمجهري البصري بينت فشل الكلال45 ) في المادة الرابطة ثم في الألياف بينما o, 0o/90o ± ) في منطقة التخصر في العينات المفحوصة0 ) فان الكلال يظهر عند الألياف. o ) العينات ذات الاتجاه الواحد} }