TY - JOUR ID - TI - Effect of Some Processing Parameters on Arc Sprayed Coating تاثير بعض العوامل التشغيلية على طلاء الرش بالقوس AU - Ali Hussein Ataiwi PY - 2008 VL - 26 IS - 12 SP - 1550 EP - 1562 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - In this work, arc spray coating of 13% Cr-steel (BS403S17) has been used inrepair of nodular cast iron journals. This study discusses the processing factorseffecting the roughness, hardness,and wear resistance of coating produced byarc spraying. The studied factors are applied voltage, wire feed rate, sprayingdistance (distance between gun nozzle and substrate) and coating thickness. Allcoated samples were tested using pin on ring wear testing machine.The final results showed that the best voltage in this application is between 28and 30 V. With this voltage a reduction in wear rate of about 8% can beobtained. The research reveals that the wear rate decreases by 46% withincreasing in wire feed rate from 68 to 122 mm/s and it is found that the bestspraying distance is about 10 to15 cm to get a good coating surfaces withreduction by about 58% in wear rate. It is also approved that coating thicknesshas positive effect on reducing wear rate by 43%.

في هذا البحث تم استخدام اكساء من مادة الفولاذ الكرومي ( 13 % كروم) في تصليح مساند مننوع حديد الصب العقدي .ناقش هذا البحث دراسة العوامل التشغيلية المؤثرة على صلادة و خشونة و مقاومة بليان الاكساءالمنفذ بطريقة الرش بالقوس الكهربائي, وتشمل هذة العوامل الفولتيةالمسلطة ومعدل تغذية السلكومسافة الرش وسمك طبقة الاكساء. وان جميع العينات المكسية قد تم فحص مقاومتها للبليان باستخدامفحص المسمار على القرص.30 )فولت _ اوضحت النتائج النهائية للبحث بان احسن فولتية يمكن استخدامها لهذا التطبيق هي ( 28اذ انخفض معدل السوفان بمقدار 8% للسطوح التي تم اكساؤها .كما ظهر انخفاض بمعدل السوفانبنسبة 46 % بزيادة معدل تغذية اسلاك الطلاء من 68 الى 122 ملم /ثا.كما وجد ان افضل مسافة15 )سم للحصول على سطوح اكساء جيدة مع تحسين في زيادة مقاومة _ للرش تكون بحدود ( 10السوفان بنسبة تقارب 58 % .كذلك اثبت البحث ان لزيادة السمك الاكساءتاثير ايجابي في خفض معدل.% السوفان بنسبة 43 ER -