@Article{, title={Study of the Misalignment of the Rotary Kiln Relative to Carrying Roller Center in Cement Factories on the Stress in Bearings دراسة تأثير انحراف الفرن الدوار عن محور العجلات الحاملة في معامل الأسمنت على الإجهادات في المحامل}, author={Dr. Sabah. m. j. Ali د. صباح محمد جميل ملا علي and Mr. Ahmed M. Abdullah السيد أحمد محمود عبدالله}, journal={AL-Rafidain Engineering Journal (AREJ) مجلة هندسة الرافدين}, volume={19}, number={3}, pages={22-33}, year={2011}, abstract={ABSTRACT:Misalignment problem is considered as one of the most important and common repeated problems in rotary kiln in meanly all of cement factories. This will lead to generation of vibration and extra loads on bearing of the carrying rollers. Also a non-uniformity can occur in distribution of applied load on all the surface of the bearing which being concentrated on one or two sides of the bearing surface, and finally leads to falling the fire lining. The present research work is concentrated on the analysis of stresses generated on bearing of the carrying rollers of the rotary kiln in new Hammam Al-Alil factory. In addition the effect of misalignment is shown on stresses distribution and it's concentration. This is important for the bearing design and those who work in bearing maintenance in this factory.The "(ANSYS 9.0)", which uses a finite element technique, had been utilized in this program. This is a very efficient and accurate tool in stress analysis for many cases. The stresses had been calculated for the assumed cases.The results showed clearly that the stress distribution and concentration on the bearing is altered with misalignment for each case.Keywords: Misalignment, Rotary kiln, Techniques , ANSYS

الخلاصـة:تعد مشكلة عدم المحاذاة في الأفران الدوارة (Rotary Kilns) من أهم المشاكل التشغيلية الشائعة والمتكررة الحدوث في معظم معامل الاسمنت إذ تؤدي إلى توليد اجهادات وأحمال إضافية على محامل العجلات الحاملة, والى عدم انتظام توزيع الحمل المسلط على سطح المحمل بتركزه على جانب واحد أو جانبين من جوانب المحمل .وبالتالي إلى سقوط البطانة النارية الموجودة داخل جسم الفرن.يتمحور هذا البحث حول تحليل الإجهادات المتولدة على محامل العجلات الحاملة للفرن الدوار في معمل سمنت حمام العليل الجديد, ودراسة تأثير التغير في حالة عدم المحاذاة في توزيع هذه الإجهادات وتركزها نظرا لما لدراسة تمركز الإجهادات من أهمية كبيرة بالنسبة للعاملين في مجالات تصميم المحامل وصيانتها, إذ يتوقع أن يبدأ تلف في مادة المحامل عند مناطق تركز الإجهادات. أُستُخدِم في هذا البحث برنامج (ANSYS 9.0) بوصفه أداة فاعلة ودقيقة في تحليل الإجهادات ولحالات متعددة, إذ تم اختيار نوع المعدن وتقسيم النموذج إلى الشرائح المختارة له وإجراء عملية التقييد وتسليط الحمل, وأخيرا الحصول على قيمة الإجهادات ولكل حالة من حالات عدم المحاذاة المفروضة.بعد عرض النتائج المستحصلة من البرنامج, يمكن ملاحظة التغير الذي يحدث على توزيع الإجهادات والانفعالات وقيم الانزلاق والتداخل والإزاحات وأماكن تركزها على سطح المحمل مع حالات عدم المحاذاة.} }