@Article{, title={Study of Corrosion Behavior of Metal Matrix Composite Based on Al-Alloy (7020) Prepared by Atomization دراسة سلوك التأكل لمادة متراكبة معدنية ذات اساس سبيكة المنيوم 7020 محضرة بطريقة التذرية}, author={Muna K. Abbass and Muhammad S. Waheed}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={28}, number={8}, pages={1502-1514}, year={2010}, abstract={An experimental procedure has been fully formulated and carried out toprepare composite material of an aluminum (alloy 7020) matrix reinforced by Al2O3 particles with weight percentages of 5%, 7% and 10% and its particle size of (+53-75)μm using molten metal atomization technique. These experiments involve the preparation of aluminum matrix composite (AMCS) materials and study their Corrosion resistance in 3.5% solution of NaCl at temperature degrees 30˚C, 38˚C and 45˚C using various testing techniques. These include electrochemical corrosion and optical microscopy .The corrosion rate was found to increase as the temperature was nominally raised from 30˚C to 38˚C and 45˚C for the 10%wt of alumina in atomized AMCS samples in 3.5% NaCl solution. At a temperature of 30˚C the corrosion rate was found to rise with increasing percentages of Al2O3 particles for 5%, 7% and 10% atomized samples. This is due to galvanic corrosion between the matrix and the second phases (MgAl2O4) and (MgO) in microstructure of AMCS. Optical microscope showed a profound appearance of general corrosion in all microstructural area and grain boundaries.

تم وضع طريقة عمل مناسبة لتحضير مواد متراكبة ذات أساس سبيكة المنيوم نوع 7020 مقواة(75 - 10 %) وذات حجوم دقائق تتراوح بين ( 53 , %7, % بنسب وزنية ( 5 Al2O بدقائق من الألومينا 3مايكرون بأستخدام تقنية التذرية لمنصهر السبيكة بعد تصنيع وتشغيل منظومة لهذا الغرض .شملتالتجارب التي تضمنها البحث الحالي على تحضير هذه المواد ودراسة مقاومتها للتاكل الكهروكمياوي في(30˚C, 38˚C, 45˚C) محلول ذو تركيز 3.5 % من كلوريد الصوديوم عند درجات حرارية مخ تلفةباستخدام طرق الفحص والقياس والتي تضمنت اختبارات التآكل الكهروكيمياوي والمجهر الضوئي.اثبتت تجارب التاكل الكهروكمياوي ان معدل التآكل للعينات المحضرة بنسبة 10 % من الآلومينا45 في محلول 3.5 % كلوريد الصوديوم بسبب ˚C 38 و ˚C 30 الى ˚C يزداد بازدياد درجات الحرارة من% التغير الحاصل في حركية التفاعل ومعدلات الانتشار العالي. ان زيادة نسبة مادة التقوية من 5% الى 730 يزيد معدل التاكل وهذا يعود الى نشوء التاكل الكلفاني بين الاطوار ˚C و 10 % في درجة حرارةالناتجة من تفاعل مادة التقوية مع المغنيسيوم , والمادة الاساس. (MgO) و (MgAl2O الثانوية مثل ( 4يلاحظ من مشاهدة صور المجهر الضوئي ان التاكل يحدث في جميع مناطق التركيب المجهري.( general corrosion) وكذلك الحدود الحبيبية وهذا يدل على ان التاكل هو نوع التاكل العام} }