TY - JOUR ID - TI - The Influence Of Tool Geometry Of Friction Stir Welds On Mechanical Properties And Microstructure Of 2218-T72 Aluminum Alloy AU - Samer J. Mahmood AU - Qasim M. Doos PY - 2011 VL - 17 IS - 5 SP - 1242 EP - 1259 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - Friction stir welding (FSW) process is an emerging solid state joining process in which the material that is being welded does not melt. This process uses a non-consumable tool to generate frictional heat in the abutting surfaces. The welding parameters such as tool rotational speed, welding speed, axial force, etc., and tool pin profile play a major role in deciding the weld quality. In this investigation an attempt has been made to understand the effect of tool pin profile and rotation diameter on microstructure and mechanical properties in aluminum alloy (2218-T72). Five different tool pin profiles (straight cylindrical, threaded cylindrical, triangular, square, and threaded cylindrical with flat), with three different rotation diameter (3, 4, 5) mm. have been used to fabricate the joint. Effect of tool pin profile on mechanical properties of welded joints were investigated using different mechanical tests including (tensile, bending and microhardness tests). Microstructure characteristic during (FSW) process was studied and different welding joint were investigated using optical microscope. Based on the stir welding experiments conducted in this study the results show that aluminum alloy (2218-T72) can be welded using (FSW) process with maximum welding efficiency (86.95%) and (83.21%) in terms of ultimate tensile strength and bending force respectively using tool pin profile (threaded cylindrical with flat) with rotation diameter (5) mm, rotation speed (900rpm) and (30mm/min) welding speed.

اللحام بالاحتكاك والخلط من الطرق التي تضهر الحالة الصلبة لطرق الربط والتي تكون حالة المعدن الملحوم ليست منصهرة.الطريقة تستخدم عدة غير مستهلكة لتوليد حرارة الاحتكاك في السطح المحاذي.أن عناصر اللحام مثل السرعة الدورانية لعدة اللحام وسرعة اللحام والقوة العمودية الخ.. بالأضافة الى شكل رأس العدة يلعب دور مهم بتحديد نوع اللحام. في هذا البحث محاولة لفهم تأثير شكل رأس العدة وقطر الدوران على الخصائص الميكانيكية والميتالورجية لسبيكة الألمنيوم استخدمت خمس اشكال لرأس العدة(أسطواني عدل,أسطواني مسنن, مثلث, مربع, أسطواني مسنن مع شق منبسط) مع ثلاثة أقطار دورانية مختلفة (3,4,5)ملم لأنشاء الوصلات. أن تاثير شكل رأس العدة لوصلات اللحام تم دراستها بالأعتماد على الفحوصات الميكانيكية الأتلافية مثل(فحص الشد,فحص الأنحناء,فحص الصلادة المجهرية) كذلك تم دراسة التغيرات الميتالورجية خلال عملية اللحام ودراسة مناطق اللحام المختلفة بأستخدام مجهر ضوئي. من التجارب المختلفة في هذة الدراسة اتضح بأن سبيكة الالمنيوم قابلة للحام بهذة الطريقة مع الحصول على اقصى كفائة لحام وصلت الى (86,95%)و(83.21) اعتماد على مقاومة الشد وقوة الانحناء بالتتابع بأستخدام شكل رأس عدة (أسطواني مسنن مع شق منبسط)وقطر دوران (5ملم).بسرعة دورانية 900 دورة بالدقيقة وسرعة لحام 30 ملمتر بالدقيقة ER -