@Article{, title={Laser Hole Drilling of Stainless Steel 321H and Steel 33 Using 3D CO2 Laser CNC Machine تثقيب فولاذ مقاوم للصدأ نوع H321 وفولاذ كاربوني نوع 33 باستخدام ليزر ثاني أوكسيد الكاربون (CO2) وماكنة ذات تحكم رقمي مبرمج ثلاثية البعاد}, author={Furat I. Hussein}, journal={Iraqi Journal of Laser المجلة العراقية لليزر}, volume={10}, number={2}, pages={15-21}, year={2011}, abstract={Abstract: In present work an investigation for precise hole drilling via continuous wave (CW) CO2 laser at 150 W maximum output power and wavelength 10.6 µm was achieved with the assistance of computerized numerical controlled (CNC) machine and assist gases. The drilling process was done for thin sheets (0.1 – 0.3 mm) of two types of metals; stainless steel (sst) 321H, steel 33 (st). Changing light and process parameters such as laser power, exposure time and gas pressure was important for getting the optimum results. The obtained results were supported with computational results using the COMSOL 3.5a software code.

في هذا البحث تم التحقق من تنفيذ تثقيب دقيق باستخدام ليزر ثاني اوكسيد الكربون (CO2) مستمر ذو قدرة 150 واط كأقصى قدرة وبطول موجي 10.6 مايكرومتر مركب على ماكنة ذات تحكم رقمي مبرمج (CNC) مع وجود غاز مساعد أثناء العمل . أن أجزاء التثقيب تم لصفائح ذات سمك من 0.1 -0.3 ملم لنوعين من المعادن (فولاذ مقاوم للصدأ نوع H321 وفولاذ كاربوني نوع 33). للحصول على النتائج المثلى في هذا العمل ، تم التحكم بالعديد من المتغيرات مثل قدرة شعاع الليزر وزمن التعريض مع ضغط الغاز المساعد. تم تعزيز النتائج بأستخدام برنامج حاسوبي تحليلي هو كومسول 3.5a COMSOL} }