TY - JOUR ID - TI - INFLUENCE OF CERAMIC PARTICLES ON THE COEFFICIENT OF THERMAL EXPANSION OF ALUMINIUM ALLOY MATRIX COMPOSITE دراسة تأثير دقائق السيراميك على معامل التمدد الحراري في المواد المتراكبة التي أساسها الألمنيوم AU - Inad F. Mustafa عناد فتحي مصطفى PY - 2010 VL - 18 IS - 1 SP - 98 EP - 103 JO - AL-Rafidain Engineering Journal (AREJ) مجلة هندسة الرافدين SN - 18130526 22201270 AB - Abstract The increased role of advanced materials in mechanical design optimization has purred the development of new material types and combinations previously unavailable to the designer. These new materials give the designer the ability to design higher density systems by matching the material characteristics of all parts within the system. Certain metal matrix composites now allow the designer to select needed material properties over a fairly large range for example (thermal expansion, conductivity and material strength).The current work has been made for the evaluation of coefficient of thermal expansions (CTE) of Aluminum based cast composites reinforced with mixture of (Al2O3 ) and (SiC) particles with different volume fraction. The cast composites have been prepared by liquid metallurgical route. The results show that (CTE) significantly increased with increasing temperature up to 400 C. But it has been observed that (CTE) decreases with increasing volume fraction of reinforcing particles. The (CTE) values were found to be comparable with theoretical results. Turner model showed good agreement with the current experimental results. Key words: Coefficient of thermal expansion(CTE); Aluminium metal matrix composites ;AL2O3 and SiC particles.

الخلاصةإن الدور المتزايد للمواد المتقدمة في التصميم الميكانيكي الأمثل يستنهض أنواع من المواد الجديدة ومجموعاتها غير المتيسرة سابقا للمصمم. إن هذه المواد الجديدة تعطي للمصمم القابلية لتصميم مجموعات ذات كثافة عاليه وذلك من خلال التوافق بين خواص المواد لكل الأجزاء ضمن المجموعة . هناك الآن مواد مركبه تسمح للمصمم لاختيار مواصفات المواد المطلوبة بالاضافه إلى مدى كبير من (التمدد الحراري التوصيل الحراري ومقاومة المواد على سبيل المثال) . إن العمل الحالي أنجز من اجل تقدير معامل التمدد الحراري لمركبات الألمنيوم المقوى بخليط من دقائق اوكسيد الألمنيوم وكربيد السليكون وبأجزاء ذات أحجام مختلفة إن المواد المتراكبة الحالية تم تحضيرها بطريقه السباكة التقليدية ألمعروفه.أظهرت النتائج بان هناك زيادة واضحة في معامل التمدد الحراري بزيادة درجة الحرارة لغاية 400 درجة مئوية إلا انه لوحظ بان ER -