TY - JOUR ID - TI - Electrolytic Removal of Zinc Using A Flow-Through Cell With Amalgamated Copper Screen Cathode الازالة الاليكتوليتية للزنك باستخدامخلية من نوع flow-through مع قطب الكاثود من النحاس المملغم من نوع الغربان AU - Anaam A. Sabri AU - Mumtaz A. Zablouk AU - Abbas H. Sulaymon PY - 2009 VL - 27 IS - 2 SP - 362 EP - 372 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - The aim of this work was to establish an electrolytic method for the removal ofzinc from waste water using a flow-through cell with amalgamated copper screencathode .The performance of the electrolytic reactor were investigated by using differentof electrolyte flow rates (60, 120, 180, 240, 320L/h) and different initial concentration ofzinc solutions(48, 96, 150mg/L).A synthetic solution was processed using boric acid(0.1M) plus potassium chloride (0.1M) as the supporting electrolyte .The electrolytic cellemployed a constant potential of -1.4V vs. SCE in the controlled potential mode.Dimensionless Sherwood and Reynolds numbers were correlated to characterizethe mass transport properties of the reactor, and they where fitted to the equation:Sh = 0.6835Re0.3895 Sc1/ 3 For 1< Re < 6.5, 700 < Sc < 1390

ان الهدف من هذا العمل هو تحقيق عمل الطريقة الالكتروليتية لازالة الزنك من الماء المهدوريستخدم فيها قطب الكاثود من النحاس المملغم من نوع ( flow-through) باستخدام خليه من نوع(320 ,240 ,180 ,120, الغربال. تم البحث بأستخدام معدلات جريان مختلفه للالكتروليت ( 60150 ) ملغملتر واستخدم في الخلية الالكتروليتية ,96 , لترساعه وتراكيز ابتدائيه مختلفه للزنك ( 48نسبة الى قطب الكالوميل القياسي بطريقة فرق الجهد هو المسيطر. وتم ( V فرق جهد ثابت(- 1.4(0.1M) 0.1 ) مع كلوريد البوتاسيوم M) التعامل مع محلول أصطناعي بأستخدام حامض البوريككالكتروليت مساعد. وتم أيجاد معادله لتمييز خواص انتقال الكتلة للمفاعل بأستخدام رقم رينولد ورقمشيروود, للمديات التاليه:Sh = 0.6835Re0.3895 Sc1/ 3 For 1< Re < 6.5, 700 < Sc < 1390 ER -