TY - JOUR ID - TI - Experimental And Theoretical Investigation Of Composit Materials As Thermal Insulation For Resident Building دراسة نظرية وعملية لمواد مركبة كعازل حراري لبناية سكنية AU - Ahmed A. Abdul Shaheed احمد عبد الشهيد AU - Fadhel A. Abdulla فاضل عباس عبد الله AU - Qasim S. Mehdi قاسم صالح مهدي PY - 2010 VL - 14 IS - 3 SP - 105 EP - 123 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - This work involves a theoretical and experimental investigation of three types of composite laminated materials as thermal insulations for roofs. The composite consist of three types fiberglass with polyester resin. The first is of; random fiberglass type-1, (density of 659.3 kg/m3).The second is random fiberglass type-2, (density of 731.8 kg/m3) and the last is matt fiberglass,( density 1010.5 kg/m3). The theoretical investigation involved a study of the solar radiation received by the walls and roof, heat gain reduction of roof for the three types of composite materials at different variables; these involved the (insulation thickness, number of layers of composite insulation, volume fraction, and the air gap between roof and the insulation. The experimental investigation is divided into two parts: the first part included measurement of thermal conductivity of composite materials using Lee's disc method with different volume fraction. The second part included manufacturing of two rigs (reference rig and test rig) with dimension (1m x 1m x 1m height). Theoretical results proovs that the heat gain for the roof is more than that of the walls. Also the heat gain is decreased with different percentages depending on the type of insulation. Obviously the heat gain is decreased with using air gap. The thermal conductivity is increased with volume fraction theoretically and experimentally. Experimental result proofs that using random fiberglass type-1 is best in the present work. Also the air gap increases the efficiency of thermal insulation.

تمت دراسة نظرية وعملية لاختبار ثلاثة انواع من المواد الركبة كعوازل حرارية للسقوف. تتكون هذه المواد من الالياف الزجاجية وراتنج البولستر. انواع الالياف المستخدمة هي الياف زجاجية عشوائية نوع-1 وتبلغ كثافتها 659.3kg/m3 , الياف زجاجية عشوائية نوع-2 وتبلغ كثافتها 731.8 kg/m3, والياف زجاجية (حصيرة) ذات كثافة kg/m3 1010.5.تضمن الجزء النظري حساب كمية الاشعاع الشمسي المستلم عبر الجدران والسقف , وتحديد نسبة تخفيض الكسب الحراري للسقف عند استخدام العوازل الثلاثة لعدة متغيرات هي (سمك العازل,عدد طبقات الالياف في العازل, الكسر الحجمي, وجود فجوة هوائية بين العازل والسقف). يتضمن الجزء العملي قسمين: يتضمن القسم الاول قياس الموصلية الحرارية للمواد المركبة لعدة كسور حجمية باستخدام تقنية ( اقراص – لي). في القسم الثاني تم بناء هيكلين ابعاد كل منهما (1مx1مx1م ) , الهيكل الاول يعتبر مصدر اساس لدرجات الحرارة المقاسة اما الهيكل الثاني فيستخدم لاختبار العوازل الحرارية. اثبتت النتائج النظرية ان الحرارة المكتسبة عبر السقف مقارنة بالجدران هي الاكبر. كما ان الكسب الحراري عند استخدام العوازل الحرارية الثلاثة يقل بنسب متفاوتة وحسب نوع العازل. كما يقل الكسب الحراري بشكل ملحوض عند استخدام فجوه هوائية بين العازل والسقف. لوحظ ان الموصلية الحرارية للمواد المركبة تزداد بزيادة الكسر الحجمي لهذه المواد نظريا وعمليا. برهنت النتائج العملية ان استخدام الالياف الزجاجية ER -