TY - JOUR ID - TI - A Simplified Numerical Model for a Flat Continuous Triangle Fins Air Cooled Heat Exchanger Using a Step by Step Technique نموذج عددي مبسط لمبادل حراري ذو زعانف مستمرة مثلثة الشكل مبرد بالهواء AU - Ali Ahmed Abdulrasool علي احمد عبد الرسول AU - Fouad Alwan Saleh فؤاد علوان صالح AU - Ali Hussain Tarrad علي حسين طراد PY - 2009 VL - 13 IS - 3 SP - 38 EP - 60 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - This investigation deals with the performance prediction of cross flow air cooled heat exchangers. An experimental work was carried out on a finned tube air cooled heat exchanger. A water supplying system rig was built for this object which provides water at temperature range of (10 to 50) °C with water circulating rate up to (2000) l/hr. Air volumetric flow rates of (500,1000 and 2000) cfm at a temperature of (32) ºC was used during the experiments. A two dimensional model was suggested to perform the core dimensions prediction of the air cooled heat exchanger. This model was based on the step by step technique which is suggested to divide the height and depth dimensions of the heat exchanger to slices and rows respectively. The thermal performance represented by heat load, heat transfer coefficient (air side), overall heat transfer coefficient and air exit temperature from heat exchanger were predicted by the present model. The suggested simulation model showed that the maximum discrepancy between the predicted and experimental values of the heat exchanger performance was about (3 %).

البحث الحالي يَتعاملُ مع التنبؤ بأداءِ المبادلات الحرارية المبرّدة بالهواء ذات الجريان المتقاطع . تم إجراء الجانب العملي من هذا البحث على مبادل ذو أنابيب مزعنفة مبرد بالهواء. تم بناء منظومة مختبريه تقوم بتجهيز الماء بدرجات حرارة تتراوح بين (10) و (50) مº وبمعدل جريان يصل إلى (2000) لتر/ساعة. التجارب العملية تم تنفيذها لثلاث قيم لمعدل حجمي لجريان الهواء هي (500), (1000) و(2000) قدم3/دقيقة بدرجة حرارة (32) مº. تم بناء نموذج رياضي ثنائي الإبعاد للتنبؤ بالإبعاد الفيزياوية للمبادل الحراري المبرد بالهواء. يعتمد النموذج على تقنية مبدأ الخطوة-خطوة والتي عند تطبيقها تم تقسيم السمك والارتفاع للمبادل إلى صفوف و شرائح على التوالي. تم التنبؤ باستخدام النموذج الحالي بالأداء الحراري للمبادل متمثلاً بالحمل الحراري, معامل انتقال الحرارة لجانب الهواء, معامل انتقال الحرارة الكلي ودرجة حرارة الهواء الخارج من المبادل الحراري. لقد بين النموذج المقترح إن اكبر فرق بين النتائج العملية والقيم المحسوبة لأداء المبادل الحراري كان بحدود (3) %. ER -