TY - JOUR ID - TI - Experimental and Theoretical Study to Minimize the Cooling Load by Using a New Alternatives in a Space located in Baghdad City دراسة عملية و نظرية لتقليل حمل التبريد باستخدام بدائل جديدة لحيز في مدينة بغداد AU - Ali Hussain Tarrad علي حسين طراد AU - Fouad Alwan Saleh فؤاد علوان صالح AU - Wathiq Abdullah Ali واثق عبد الله علي PY - 2009 VL - 13 IS - 3 SP - 109 EP - 127 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - The present investigation is concerned with the alternatives used for the cooling load reduction of a space in Baghdad. A numerical and experimental study has been accomplished in Baghdad during July and August of 2008 with the application of a new technique by a suitable alternative for minimizing the cooling load. In the experimental side of this work, a vertical aluminum flat plate is situated on the eastern and southern walls. This sheet is extended into the under ground to a depth of (1) m of a cube test room having (1) m3 size. The experimental data showed that the indoor temperature reduced from (34.5) °C to (31.7) °C and (29.9) °C when using aluminum plate with air gap and glass wool insulation respectively. The heat flux on the southern wall reduced by (23.5%) and (33.7%) for air gap and glass wool respectively. The corresponding reductions on the eastern wall were (20%) and (29.8%) for air gap and glass wool respectively. A numerical simulation two-dimensional model was performed applying a finite difference technique implemented in a sophisticated MATLAB program. The results of thermal simulations have revealed that the system can significantly reduce the building cooling load when the suggested alternatives have been applied. Finally, it was found that the numerical model was in a good agreement with the experimental data with a maximum discrepancy of (5 %) for the heat flux at the exposed walls.

يهتم البحث الحالي بالبدائل المستخدمة لتقليل حمل التبريد لحيز في مدينة بغداد. تم إعداد دراسة عددية وتجريبية في مدينة بغداد خلال شهري تموز و آب من عام (2008) بتطبيق تقنية جديدة باستخدام بديل ملائم لتقليل حمل التبريد. في الجانب العملي من هذا البحث، تم تثبيت صفيحة معدنية مصنوعة من الألمنيوم بسمك (1) ملم على الجدران المواجهة للشرق والجنوب من حيز مكعب الشكل بحجم (1) م3 وتمتد تحت الأرض بعمق (1) م. لقد بينت النتائج إن درجة حرارة الحيز انخفضت من (34.5) مo إلى (31.7) مo و (29.9) مo عند تثبيت الصفيحة وبوجود فجوة من الهواء أو طبقة من الصوف الزجاجي محصورة بين الجدار والصفيحة على التعاقب. تم تخفيض الفيض الحراري المسلط على الجدار المواجه للجنوب بمقدار (23.5 %) و(33.7 %) لحالة طبقة الهواء والصوف الزجاجي مع الصفيحة المعدنية على التعاقب. الانخفاض المناظر للجدار المواجه للشرق كان (20 %) و (29.8 %) لحالة فجوة الهواء والصوف الزجاجي مع الصفيحة المعدنية على التوالي. في الجانب النظري تم بناء نموذج عددي ثنائي الأبعاد بتطبيق تقنية الفرو قات المتناهية أعدت ضمن برنامج تم بناؤه لهذا الغرض. النتائج النظرية للمحاكاة بينت إمكانية تقليل حمل التبريد للحيز عند استخدام البدائل المقترحة. أخيراً كان هناك تطابق جيد بين النتائج العملية والنظرية للنموذج العددي وباختلاف يصل إلى (5 %) كحد أقصى للفيض الحراري المسلط على السطوح المعرضة لأشعة الشمس. ER -