TY - JOUR ID - TI - Predicting Mechanical Properties of High Performance Concrete by Using Non-destructive Tests التنبؤ بالخواص الميكانيكية للخرسانة عالية الأداء بإستخدام الفحوصات اللاإتلافية AU - Sura F. Al-Khafaji AU - Waleed A. Al-Qaisi AU - Shakir A. Al-Mishhadani PY - 2009 VL - 27 IS - 3 SP - 425 EP - 444 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - In this study, high performance concrete mixes were produced by using highrange water reducing agent and also by using 10% silica fume or 10% highreactivity metakaolin as a partial replacement by weight of cement. Three cementcontents (350, 450, and 550) kg/m3 were used through this study. A total of 330(100 mm) cubes, 132 (100×200 mm) cylinders, 132 (100×100×400 mm) prisms,and 66 (150×300 mm) cylinders were casted and cured to the required age of test .All specimens were cured in tap water except 165 cubes, which were submerged inCl ˉ + SO4ˉ ˉ solution at concentration identical to those present in severeaggressive environment to study the effect of this solution on the compressivestrength of high performance concrete mixes. Compressive strength, splittingtensile strength, modulus of rupture, static modulus, rebound number, ultrasonicpulse velocity, dynamic modulus, initial surface absorption, density ,and totalabsorption tests were investigated for all mixes at 7, 28, 90, and 120 days age.Results of the destructive tests (compressive tensile strength, strength, splittingmodulus of rupture, and static modulus) and non–destructive tests (hammer,ultrasonic pulse velocity, and dynamic modulus) are statistically analyzed by usingSPSS Ver.15 software to study the possibility of predicting the mechanicalproperties of high performance concrete by using non–destructive tests. Simple andmultiple linear regression analysis of the obtained results leads to the proposedstatistical models for evaluating the compressive strength, splitting tensilestrength, modulus of rupture, and static modulus by using one or two or three ofthe above mentioned non–destructive tests. Analysis of variance (ANOVA)and t–test was also used to investigate the adequacy of the statistical models.

تم في هذه الدراسة انتاج خلطات خرسانية عالية الاداء باستخدام مضاف مقلل للماء بدرجة متفوقةوكذلك باستخدام ابخرة السليكا المكثفة بنسبة ١% او الميتاكاؤولين عالي الفعالية بنسبة ١% كتعويضعن جزء من وزن الاسمنت ، كما و تم استخدام ثلاث محتويات من السمنت 426٤٥٠،٣٥٠ و ٥٥٠ ) كغم/م ٣. تم صب و تهيئة ٣٣٠ مكعب بابعاد ( ١٠٠ ملم) ، ١٣٢ اسطوانة )٤٠٠ ملم ) و ٦٦ اسطوانة بابعاد ×١٠٠× ٢٠٠ ملم) ، ١٣٢ موشور بابعاد ( ١٠٠ × بابعاد ( ١٠٠٣٠٠ ملم) و قد عولجت جميعها بالماء لغاية عمر الفحص المطلوب ما عدا ١٦٥ مكعب تم ×١٥٠)غمرها جزئياً في محلول الكلوريدات و الكبريتات بتراكيز مماثلة لتلك الموجودة في ظروف بيئيةقاسية لدراسة تأثير هذا المحلول على مقاومة الانضغاط للخلطات الخرسانية العالية الاداء .اجريت فحوصات مقاومة الانضغاط ، مقاومة الشد الانفلاقي ، مقاومة الانثناء ، معامل المرونةالاستاتيكي ، رقم الارتداد، سرعة الموجات فوق الصوتية، معامل المرونة الديناميكي ، فحصالامتصاص السطحي الاولي ، الكثافة ، وفحص الامتصاص الكلي باعمار ١٢٠،٩٠،٢٨،٧ يوم .تم تحليل نتائج الفحوص ات الإتلافية (مقاومة الانضغاط ، مقاومة الشد الانفلاقي ، مقاومة الانثناء، ومعامل المرونة الاستاتيكي ) و اللاإتلافية (رقم الارتداد، سرعةالموجات فوق الصوتية، معامللدراسة امكانية التنبؤ بالخواص (SPSS Ver. المرونة الديناميكي) احصائياً باستخدام برنامج ( 15الميكانيكية لخرسانة عالية الاداء باستخدام الفحوصات اللاإتلافية . التحليل الانحداري البسيطوالمتعدد الخطي للنتائج المستحصلة ادى الى النماذج الاحصائية المقترحة لتقييم الخواصالميكانيكية باستخدام فحص واحد او فحصين او ثلاثة من الفحوصات اللاإتلافية . كذلك تم استخداملتحري كفاءة النماذج الاحصائية. (t-test) و (ANOVA) تحليل التباين ER -