@Article{, title={EFFECT OF ADDING SISAL FIBER AND IRAQI BAUXITE ON SOME PROPERTIES OF CONCRETE تأثير إضافة ألياف السيسال والبوكسايت العراقي على بعض خواص الخرسانة}, author={Moslih Amer Salih Al Khafagy and Kawkab Habeeb Al Rawi}, journal={Journal of Techniques مجلة التقني}, volume={24}, number={2}, pages={58-73}, year={2011}, abstract={This investigation aim to study the effect of sisal fiber addition on the different properties of concrete, also to study the use of the Iraqi bauxite for the first time in Iraq as a pozzolanic material. Sisal fiber was used at three percentages of total mix volume (0.5%, 1.0% and 1.5%), Iraqi bauxite was used in three percentages (10%, 20% and 30%) as a partial replacement by weight of cement. This paper studied the effect of Sisal fiber and the Iraqi Bauxite on the mechanical properties which represented by the compressive strength, flexural strength, splitting strength, impact resistance for tiles, also the ultrasonic pulse velocity test which is one of the non-destructive testes, the pH level and water absorptions has been done. The results from this study showing that the concrete reinforced with sisal fiber and using Iraqi bauxite exhibited improvement in flexural strength and splitting tensile strength while a small reduction in compressive strength was reported. The results showed also improvement in the impact resistance. Adding of sisal fiber made a reduction in the ultrasonic pulse velocity. The results showed that this kind of concrete reported a reduction in water absorption in comparative with reference concrete reinforced with fibers only. The use of bauxite as a partial replacement of cement reduced the alkalinity of concrete reinforced with fiber and that would improve its durability. From the results of this investigation, found that concrete reinforced with 1.0% of sisal fiber give the best results and using Iraqi Bauxite with 20% as a partial replacement by weight of cement enhanced the properties of reinforced concrete with sisal fiber.

يهدف هذا البحث إلى دراسة تأثير إضافة ألياف السيسال على الخواص المختلفة للخرسانة وكذلك دراسة استخدام أطيان البوكسايت العراقي ولأول مرة في العراق كمادة بوزولانية. تم استخدام ألياف السيسال بثلاث نسب من الحجم الكلي للخرسانة (0.5%, 1.0% و 1.5%). استخدم البوكسايت العراقي كتعويض جزئي من وزن الاسمنت بثلاث نسب (10%, 20% و 30%). تم دراسة تأثير ألياف السيسال والبوكسايت العراقي على الخواص الميكانيكية للخرسانة والتي تتمثل بمقاومة الانضغاط, مقاومة الانثناء, مقاومة الانفلاق ومقاومة الصدم للبلاطات كذلك إجراء أحد الفحوص غير الاتلافية والمتمثل بفحص سرعة انتقال الموجات فوق الصوتية, وإضافة إلى ذلك تم دراسة امتصاص الماء والأس الهيدروجيني. تشير النتائج المستحصلة من الدراسة إلى حدوث تحسن واضح في مقاومة الانثناء ومقاومة الشد في الخرسانة المسلحة بألياف السيسال والحاوية على البوكسايت, وحدوث انخفاض طفيف في مقاومة الانضغاط, كذلك تبين النتائج إلى إن إضافة الألياف واستخدام البوكسايت في الخلطات قد حسن من مقاومة الصدم. إضافة الألياف أدت إلى انخفاض سرعة الموجات فوق الصوتية, كذلك أظهرت النتائج ان هذا النوع من الخرسانة يعطي امتصاص اقل بالمقارنة مع الخرسانة المصدرية والمسلحة بالألياف فقط.أظهرت نتائج فحص الأس الهيدروجيني إن استخدام البوكسايت كتعويض جزئي عن وزن الاسمنت قلل من قاعدية الخرسانة المسلحة بالألياف وبالتالي تتحسن ديمومتها. وتبين النتائج في هذه الدراسة ان الخرسانة بنسبة حجميه 1.0% من ألياف السيسال أعطت نتائج أفضل من باقي الخلطات, كذلك ان استخدام البوكسايت العراقي بنسبة 20% كتعويض جزئي عن وزن الاسمنت في الخلطة قد عزز من خواص الخرسانة المسلحة بألياف السيسال} }