@Article{, title={Processing Lightweight Aggregate to produce Lightweight Concrete تصنيع ركام خفيف الوزن لإنتاج خرسانة خفيفة عازلة}, author={Daad Mohamed Daood دعد محمد داؤد** and Dr.Nadia Salim Esmaeil د. نادية سالم اسماعيل}, journal={AL-Rafidain Engineering Journal (AREJ) مجلة هندسة الرافدين}, volume={18}, number={6}, pages={10-23}, year={2010}, abstract={AbstractThe modern techniques development used in the production of concrete led to the emergence of types of concrete with different densities compared to normal concrete . This research aimed manufacturing types of lightweight aggregate (coarse and fine) and then the production of lightweight concrete blocks with a good thermal insulation , by using available locally materials . Two types of lightweight aggregate , have been produced by using two methods of manufacturing , first type , where AL-Hadbaa aggregate , produced from Clay , which is on the edge of the Tigris river in Mosul , using 50% Clay and 50% silt , the density obtained about 860 Kg/m3 . The second AL-Rabean aggregate , was the adoption of natural laminated Clay which is located in Nineveh province , in very large quantities , it's mineralization is Montmurlite and kaolinite , density obtained was 750 Kg/m3 , this type did not produce in Iraq and which it's manufactured method simple and economic . The standard tests have been made and were adopted in the production of concrete blocks , lightweight concrete block produced from AL-Hadbaa aggregate , used in bearing walls , have 28 – day compressive strength 15.33 N/mm2 and density about 1770 Kg/m3 .The AL-Rabeaan aggregate used to product concrete block for the purposes of thermal insulation , it's thermal conductivity coefficient was 0.55 W/m.kcal and have a density 1640 Kg/m3 . Keywords : Clay , lightweight aggregate , concrete block

الخلاصةأدى التطور الحديث للتقانات المستخدمة في إنتاج الخرسانة إلى ظهور أنواع من الخرسانة ذات كثافات مختلفة مقارنة بالخرسانة الاعتيادية . وهذه الكثافة يمكن الحصول عليها بعدة طرق ، إحدى هذه الطرق استعمال الركام الخفيف الوزن Lightweight aggregates. يهدف البحث الحالي إلى تصنيع أنواع من الركام الخفيف ( الخشن والناعم ) ومن ثم إنتاج كتل خرسانية خفيفة ذات عزل حراري جيد من مواد متوفرة محليا وبكلفة اقتصادية مناسبة . وقد تم الحصول على نوعين من الركام الخفيف باستخدام طريقتين من التصنيع، أطلق على النوع الأول ركام الحدباء تم تصنيعه من طين طفل موجود على حافات دجلة في منطقة الموصل بنسبة 50% وغرين Silt بنسبة 50% وتم الحصول على ركام بكثافة 860 كغم/م3. وأطلق على الثاني ركام الربيعين، وتم اعتماد الطين الطبيعي الصفائحي الموجود في محافظة نينوى بكميات كبيرة جداً والذي معدنه هو المونتمورلونايت والكاؤلين وتم الحصول على ركام بكثافة 750كغم/م3 ولم يصنع هذا النوع سابقاً في العراق وطريقة تصنيعه بسيطة واقتصادية. لقد أجريت الفحوصات القياسية لهما وتم اعتمادهما في إنتاج الكتل الخرسانية فقد حصلنا على كتل خرسانية خفيفة تستعمل في الجدران الحاملة من ركام الحدباء وكانت قوة تحملها للضغط بعمر 28 يوم 15.33 نيوتن/ملم2 وكثافتها 1770 كغم/م3 أما ركام الربيعين فقد استخدم في إنتاج كتل خرسانية لأغراض العزل الحراري وقد كان معامل التوصيل الحراري K له 0.55 واط/م.كليو سعرة وبكثافة 1640 كغم/م3 . الكلمات الدالة : الطين ، الركام الخفيف الوزن ، الكتل الخرسانية .} }