@Article{, title={Heat Transfer from an Immersed Heater in Liquid – Liquid – Solid Fluidized Beds إنتقال الحرارة في أبراج التمييع (سائل- سائل- صلب) لسطح تسخين مغمور}, author={Asrar A. Al-Obaidy and Majid I. Abdul-Wahab and Balasim A. Abid}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={27}, number={10}, pages={1901-1914}, year={2009}, abstract={Heat transfer from an immersed heating surface to a liquid-solid and liquid-liquidsolid fluidized beds have been studied. The experiments were carried out in a (0.22) m column diameter fitted with an axially mounted cylindrical heater heated electrically. The fluidizing medium was water as the continuous phase and kerosene as the dispersed phase. Low density (Ploymethyl-methacrylate) particles were used. Previouspublished heat transfer correlations, obtained for fluidized beds containing highdensity particles, gave significant deviations compared with the present data. New correlations were developed to predict the heat transfer coefficients in liquid-solid and liquid-liquid-solid fluidized beds. The new correlation is, The heat transfer coefficients obtained from the present work were compared with those estimated from other correlations reported in the literature. The comparison shows a good agreement with the data obtained for the gas-liquid-solid fluidized beds using low-density particles.

يتضمن البحث دراسة عملية إنتقال الحرارة في أبراج التمييع ثلاثية الطور (سائل - سائل - صلب) باستخدام جسيمات صلبة واطئة الكثافة وسطح تسخين مغمور في داخل الطبقة المحيطة، وقد أجريت التجارب في عمود زجاجي ذو قطر داخلي مقداره ( 0.22 ) متر وباستخدام مسخن اسطواني مسخن كهربائياً ومثبت في وسط البرج. تمت دراسة تأثير معدل جريان كل من السائل الأول (الطور المستمر) والسائل الثاني (الطور المنتشر) على معاملات انتقال الحرارة في الأبراج المميعة. كذلك تم حل المعادلات التفاضلية التي تحكم عملية إنتقال الحرارة في الطبقة المميعة باستخدام طريقة الفروق حيث تم إيجاد التوزيع القطري و المحوري لدرجات الحرارة داخل (Finite Difference) المحددةالطبق المميعة وكذلك إيجاد قيم معامل التوصيل الحراري القطري المؤثر.(Thermal Resistances Model) تم تحليل النتائج المستخلصة وفق نموذج المقاومات الحرارية وقد وجد إن المقاومة الداخلية للطبقة المميعة ذات قيمة كبيرة نسبياً في الطبقة الثنائية الطور (سائل- صلب) لكنها تقل عند إدخال الطور الثالث.تم تحليل النتائج إحصائيا لايجاد معاملات انتقال الحرارة Pr Number) ورقم براندتل (Re Number) ورقم رينولدز (Nu Number) بدلالة رقم نسلتللطبقه ثلاثية الطور سائل – سائل – صلب (Solid Holdup) والمحتوى الحجمي للجسيمات الصلبة} }