TY - JOUR ID - TI - Influence of Annealing, Normalizing Hardening Followed By Tempering And Laser Treatments on Some of The Static and Dynamic Mechanical Properties of Medium Carbon Steel أثر التلدین والتطبیع و الإطفاء المتبوع بالمراجعة والمعاملة اللیزریة على بعضالخواص الدینامیكیة والاستاتیكیة للصلب متوسط الكربون AU - Sanna A. hafeed AU - AbdulKhaliq F. Hamood PY - 2010 VL - 28 IS - 21 SP - 6274 EP - 6287 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - This research illustrates the influence of different heat treatments on the mechanical properties such as stress-strain curves ,wear resistance and fatigue properties of medium carbon steel,. This steel was treated by annealing, normalizing, hardening followed by tempering and laser treatments. The bulk mechanical properties of ultimate ,fracture and yield tensile strength were evaluated. Surface mechanical properties of fatigue, wear resistance and hardness were evaluated as well. Microstructure of treated alloys also were inspected. Results showed that (hardened -tempered) steel had improved tensile strength,fatigue{limit, life}, wear resistance, hardness then laser surface treated alloy, then the normalized alloy came in order ,but annealed alloy had the lowest mechanical properties. Annealing caused softening and growth of alloy structure. It was found that the microstructure of treated alloy play an important role in the improvement or deterioration of bulk and surface mechanical properties and by analyzing the obtained results. For (Quenched -tempered) alloy found fine tempered martensititic structure, laser surface treated alloy had martensititic structure in the skin and ferritic- pearlitic structures in the core .Normalized alloy had ferriticpearlitic structures, Annealed alloy had coarse ferritic- pearlitic structures

یوضح البحث الحالي أثر معاملات حراریة مختلفة على الخواص المیكانیكیة مثلمنحنیات الإجھاد-الانفعال،مقاومة البلیان وخواص الكلال للفولاذ متوسط الكربون. لقد أجریتمعاملات لھذه السبیكة بالتلدین والتطبیع والاطفاء المتبوع بعملیة المراجعة لتلطیف الاجھاداتالمتبقیة,.والاصلاد باستخدام تقنیة التشعیع باللیزر. تم دراسة الخواص المیكانیكیة المقترنة بالحجمالكلي للمادة والتي تضمنت مقاومة الشد القصوى،مقاومة الشد عند الكسر ، مقاومة الخضوعوالسطحیة متضمنة مقاومة الكلال ، مقاومة البلیان ،الصلادة، كما تم دراسة البنى الدقیقة للسبیكةالمعاملة. أظھرت النتائج إن الفولاذ المعامل بالاطفاء المتبوع بعملیة المراجعة حقق أعلى مقاومةشد، مقاومة كلال، صلادة، و مقاومة البلیان وتبعھ الصلب المعامل بالاصلاد باستخدام تقنیةالتشعیع باللیزر ثم الصلب المعامل بالتطبیع ولكن الصلب المعامل بالتلدین أمتلك خواصا میكانیكیةأضعف حتى من السبیكة بحالتھا المستلمة،وقد أعزي ذلك الى كون عملیة التلدین سببت نمو الحجم الحبیبي و أضعاف لتركیب الصلب.كما وجد أن نوع البنیة الدقیقة للصلب المعامل یلعب دورامھما في التحكم بالخواص المیكانیكیة المقترنة بالحجم الكلي والسطحیة وفي تفسیر النتائجالمستحصلة .الصلب المعامل بالاطفاء المتبوع بعملیة المراجعة أمتلك تركیبا مكونا أساسا منالمارتنسیت الناعم المراجع بینما الصلب المعامل بالاصلاد باستخدام تقنیة التشعیع باللیزر أمتلكتركیبا مكونا من المارتنسیت في الطبقة السطحیة ومن فیرایت مع بیرلایت في القلب، بینما الصلبالمعامل بالتطبیع أمتلك تركیبا مكونا أساسا من فیریت مع بیرلیت، ولكن الصلب المعامل بالتلدینأمتلك تركیبا مكونا من فیریت مع بیرلیت بھیئة خشنة . ER -