@Article{, title={Bond Strength Assessment for Different Types of Repair Materials تقييم مقاومة الربط لأنواع مختلفة من مواد الإصلاح}, author={Aseel S. Mansi}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={28}, number={21}, pages={6325-6336}, year={2010}, abstract={The main objective of this work is to evaluate the bond strength fordifferent types of repair materials. Three test methods; slant shear, splitting prism and Bi-Surface shear test with conventional and two polymer modified repair mortars were used, The conventional mortar (MC), polymer modified mortar (MSBR) was prepared by admixing SBR 15% of cement weight, polymer modified and fiber reinforced repair mortar named commercially Cempatch S (MCS) was prepared by mix Cempatch S with a water ratio of 0.2. The results show that the use of SBR and Cempatch S improves the bond strength of repair mortar compared with conventional repair mortar but the percentage increased with Cempatch S was greater than SBR. The percentage increase in bond strength for concrete substrate repaired with Mcs (CMcs) were 52.67, 174.8, and 46.7% for Slant Shear, Splitting Prism and Bi-Surface shear testrespectively relative to the corresponding repaired with conventional mortar MC(CMC); while, the corresponding percentages increase for concrete substrate repaired with MSBR (CMSBR) was 45.13, 129 and 30%. It is found that the bond strengths obtained from some tests was up to an average of four times larger than those obtained from others.

في هذه الدراسة تم التحري عن تقييم مقاومة الربط لأنواع مختلفة من مواد الإصلاح. تم استخدام ثلاثة طرق لفحص مقاومة الربط, طرق الفحص المستخدمة هي فحص القص المائل, فحص انشطار الموشور وفحص القص الثنائي السطحي لكل من مواد الإصلاح البوليمرية تم SBR والتقليدية. مواد الإصلاح المستخدمة هي المونة التقليدية والمونة المعدلة ببوليمير والمسلحة بالالياف SBR بنسبة 15 % والمونة المعدلة ببوليمير SBR تحضيرها باضافة مادة . مع الماء بنسبة 0,2 Cempatch S تم تحضيرها بخلط مادة Cempatch S المسماة تجاريا قد حسن Cempatch S واستخدام مادة SBR أظهرت النتائج بان استخدام بوليميرمقاومة الربط لمونة الإصلاح مقارنة مع مونة السمنت العادية ولكن نسبة الزيادة باستخدام مادة حيث كانت نسبة الزيادة في مقاومة الربط ,SBR كانت أعلى مقارنة مع مادة Cempatch S هي 52,67 و 174,8 و 46,7 % لفحص القص Cempatch S للجسم الخرساني المصلح بمادة المائل, فحص انشطار الموشور وفحص القص الثنائي السطحي على التوالي, بينما كانت النسبة هي 45,13 و 129 و 30 %. وتبين أن مقاومة SBR الزيادة للجسم الخرساني المصلح بمادة الربط لبعض أنواع الفحوص تبلغ معدل يصل إلى أربعة أضعاف تلك المستحصلة من فحوصاتأخرى} }