TY - JOUR ID - TI - Heat Transfer Enhancement Using Helical Pipes تحسين انتقال الحرارة باستخدام الانابيب المحلزنة AU - Ajaj Helal Zgayer عجاج هلال زغير PY - 2012 VL - 5 IS - 1 SP - 126 EP - 139 JO - Anbar Journal of Engineering Sciences مجلة الأنبار للعلوم الهندسية SN - 19979428 27067440 AB - The enhancement of laminar forced convection inside helical pipes is studied numerically and compared with plain pipes. The study is achieved numerically using the (Fluent-CFD 6.3.26) software program for solving the governing equations. The heat transfer coefficient and friction coefficient are calculated using the enhancement technique and compared with the plain tube. In this research the factors that affect the enhancement technique using helical pipes are studied, these factors are the ratio of (pitch /pipe length) (SL), Reynolds number and the heat flux applied to the external surface of the pipe.The results showed that there is an increasing in the heat transfer coefficient is related to the decreasing of (SL), increasing of Reynolds number and heat flux. The performance of the helical pipes is evaluated depending on the calculation of (Enhancement ratio), and it’s found that the enhancement ratio increases as Reynolds number increases and (SL) decreases. It is found that the best enhancement ratio was (200%) at (SR=0.05), (Re=2000),(Heat flux=3000W/m2).The results are compared with the literature and there is a good agreement.

يهدف البحث الحالي إلى دراسة تحسين انتقال الحرارة بالحمل ألقسري الطباقي داخل الأنابيب المحلزنة من الداخل (helical pipes) ومقارنة أداءها مع الأنابيب الاعتيادية (plain pipes). أنجزت الدراسة عدديا باستخدام برنامج (Fluent-CFD 6.3.26) لحل المعادلات الحاكمة ومن ثم حساب معامل انتقال الحرارة باستخدام آلية التحسين المستخدمة وكذلك حساب معامل الاحتكاك .تم في هذا البحث دراسة العوامل المؤثرة على تحسين انتقال الحرارة بالأنابيب المحلزنة والمتمثلة بنسبة المسافة الفاصلة SL(خطوة طول الانبوب ) ،رقم رينولدز وكذلك الفيض الحراري المسلط على السطح الخارجي للأنبوب.من نتائج الدراسة لاحظنا زيادة قيمة معامل انتقال الحرارة في حالة نقصان SL ، زيادة رقم رينولدز وزيادة كمية الفيض الحراري المسلط. تم تقييم أداء الأنابيب المحلزنة بالاعتماد على حساب نسبة التحسين Enhancement Ratio . تبين إن نسبة التحسين تزداد بزيادة قيمة رينولدز ونقصان نسبة المسافة الفاصلة SL وكانت أفضل نسبة تحسين (200%) عند حالة ( ( SL=0.05ورقم رينولدز يساوي 2000 وفيض حراري 3000W/m2 .تم مقارنة النتائج مع البحوث السابقة وكانت النتائج متقاربة الى حد بعيد. ER -