@Article{, title={The Effect of Extraction Temperature and Solvent to Oil Ratio on Viscosity Index of Mixed-medium Lubricating Oil Fraction by Using Solvents Extraction}, author={Mohammed J. Yass Kheder محمد جابر and Abdul-Halim A. Mohammed عبد الحليم عبد الكريم}, journal={Iraqi Journal of Chemical and Petroleum Engineering المجلة العراقية للهندسة الكيمياوية وهندسة النفط}, volume={10}, number={2}, pages={13-18}, year={2009}, abstract={In this study two types of extraction solvents were used to extract the undesirable polyaromatics, the first solvent was furfural which was used today in the Iraqi refineries and the second was NMP (N-methyl-2-pyrrolidone).The studied effecting variables of extraction are extraction temperature ranged from 70 to 110°C and solvent to oil ratio in the range from 1:1 to 4:1.The results of this investigation show that the viscosity index of mixed-medium lubricating oil fraction increases with increasing extraction temperature and reaches 107.82 for NMP extraction at extraction temperature 110°C and solvent to oil ratio 4:1, while the viscosity index reaches to 101 for furfural extraction at the same extraction temperature and same solvent to oil ratio. The increase in solvent to oil ratio has a higher effect on increasing the viscosity index of lubricating oil fraction compared with extraction temperature in furfural and NMP extraction.Further more, the results show that the percentage yield of raffinate was decreased as the extraction temperature and solvent to oil ratio increases for furfural and NMP extraction.

تم استخدام نوعين من المذيبات لاستخلاص المواد غير المرغوبة هذه المذيبات هي الفورفورال والمستخدم حالياً في المصافي العراقية والمذيب الاخر (N-Methyl,2,pyrrolidone) NMP.المتغيرات المؤثرة على عملية الاستخلاص والتي تم دراستها هي درجة حرارة الاستخلاص وتتراوح من 70 الى 110 °م لكل من عمليتي الاستخلاص بالفورفورال و NMP والمتغير الاخر هو نسبة المذيب الى الزيت وتتراوح بين 1:1 الى 4:1 لعملية الاستخلاص بالفورفورال وتتراوح بين 1:1 الى 4:1 لعملية الاستخلاص ب NMP.اظهرت نتائج البحث ان معامل اللزوجة للرافنيت الناتج من عملية استخلاص المقطع الزيتي يزداد بزيادة درجة حرارة الاستخلاص وزيادة نسبة المذيب الى الزيت ليرفع من (49) للمقطع الزيتي الخام ليصل الى (107) لعملية الاستخلاص ب NMP عند درجة حرارة الاستخلاص 110 °م ونسبة المذيب الى الزيت 4:1 بينما يصل الى (101) لعملية الاستخلاص بالفورفورال عند نفس الظروف من درجة حرارة الاستخلاص ونسبة المذيب الى الزيت ,وهذا يعني انه يمكن الحصول على معامل لزوجة اعلى عند استخدام NMP بدلاً من الفورفورال كمذيب في عملية الاستخلاص تحت نفس الظروف من درجة حرارة الاستخلاص ونسبة المذيب.الزيادة في نسبة المذيب الى الزيت اكثر تأثيراً على زيادة معامل اللزوجة لمقطع زيت التزييت مقارنة مع درجة حرارة الاستخلاص باستخدام مذيب الفورفورال ا وال NMP بالاستخلاص.اكثر تفصيلاً ,اظهرت النتائج ان نسبة الانتاجية للرافينيت قد قلت مع زيادة درجة حرارة الاستخلاص ونسبة المذيب الى الزيت باستخدام مذيب الفورفورال ا وال NMP بالاستخلاص.} }