TY - JOUR ID - TI - Phosphorus Removal from Water and Waste Water by Chemical Precipitation Using Alum and Calcium Chloride AU - Haider Abbas Shanshool حيدر عباس AU - Sawsan A. M. Mohammed سوسن عبد مسلم محمد PY - 2009 VL - 10 IS - 2 SP - 47 EP - 52 JO - Iraqi Journal of Chemical and Petroleum Engineering المجلة العراقية للهندسة الكيمياوية وهندسة النفط SN - 19974884 26180707 AB - Phosphorus is usually the limiting nutrient for eutrophication in inland receiving waters; therefore, phosphorus concentrations must be controlled. In the present study, a series of jar test was conducted to evaluate the optimum pH, dosage and performance parameters for coagulants alum and calcium chloride. Phosphorus removal by alum was found to be highly pH dependent with an optimum pH of 5.7-6. At this pH an alum dosage of 80 mg/l removed 83 % of the total phosphorus. Better removal was achieved when the solution was buffered at pH = 6. Phosphorus removal was not affected by varying the slow mixing period; this is due to the fact that the reaction is relatively fast.The dosage of calcium chloride and pH of solution play an important role in phosphorus removal. The removal efficiency increases with increasing pH, and the optimum dosage of CaCl2 was 60 mg/l. Alum demonstrated much better results in phosphorus removal than CaCl2.

يعتبر الفسفور من المواد الملوثة للماء والتي تؤدي الى عملية التحول في الحياة المائية (Eutrophication) ولهذا فمن الضروري السيطرة على تركيزه في الماء.في هذه الدراسة تم اجراء سلسلة من التجارب باستخدام جهاز (jar test) لايجاد افضل قيمة للرقم الهيدروجيني وكمية المادة الكيمياوية المضافة.لقد وجد ان افضل قيمة للرقم الهيدروجيني في حالة استخدام الشب هو من 5.5-6 وافضل كمية مستخدمة هي 80 ملغم/لتر والتي تعمل على ازالة 83% من كمية الفسفور الذائب في الماء وكانت عملية الازالة افضل عندما تمت السيطرة على قيمة الرقم الهيدروجيني على قيمة 6.لم تتأثر كفاءة الازالة بتغيير الزمن اللازم للتحريك البطئ و ذلك لكون التفاعل سريع.اما في حالة ازالة الفسفور باستخدام كلوريد الكالسيوم فان كمية الكلوريد المضاف والرقم الهيدروجيني للمحلول كان لها دور مهم في عملية الترسيب وان افضل قيمة للرقم الهيدروجيني هو 11 وافضل قيمة لكمية الكلوريد هي 60 ملغم/لتر.دلت النتائج على ان الشب اعطى كفاءة افضل في عملية ترسيب الفسفور بالمقارنة مع كلوريد الكالسيوم. ER -