TY - JOUR ID - TI - Corrosion Inhibition of Carbon steel on Hydrochloric acid Using Zizyphus Spina – Chritisi Extract دراسة الفعل التثبيطي لمستخلص أوراق السدر على الفولاذ الكاربوني في حامض الهيدروكلوريك AU - Adnan S.Abdul Nabi and Hanan M.Ali عــدنان سلطان عبد النبي و حنان مرتضى علي PY - 2009 VL - 35 IS - 1A SP - 67 EP - 76 JO - Journal of Basrah Researches (Sciences) مجلة ابحاث البصرة ( العلميات) SN - 18172695 2411524X AB - Naturally occurring substances are increasingly being tried to used as corrosion inhibitors of metals in acid cleaning processes to replace some toxic and expensive chemicals currently in use. The corrosion inhibition of carbon steel in hydrochloric acid by Zizyphus Spina – Chritis leaves extract was studied using weight loss techniques. Maximum inhibition efficiency and surface coverage were obtained at an optimum concentration. However, an increase in temperature lead to decreased in the inhibition efficiency at the temperature studied. Optimum inhibition efficiency for carbon steel in the presence of Zizyphus Spina – Chritis leaves extract was 99.5%, 75% and 66% at 1%,1%and 2% concentration of the inhibitor at 25oC, 35oC and 45oC respectively. The phenomenon of physical adsorption has been proposed from the activation energy values (55.66KJmol-1). The surface coverage (θ) data augment the above observation and the inhibition is attributed to the physical adsorption of the chemical components of the additive on the surface of the carbon steel. Inexpensive environmentally safe inhibitor formulations indicate have been obtained.

جرت محاولات عديدة لأستخدم المواد المستخلصة من المواد الطبيعية كمانعات تآكل للعديد من المعادن في عمليات التنظيف بالحامض وذلك لاستبدال بعض المواد الكيماوية الغالية والسامة والتي تستخدم لهذا الغرض. لذا تم في هذا البحث دراسة استخدام مستخلص أوراق السدر في تثبيط تآكل الفولاذ الكاربوني في محلول 0.5M من حامض الهيدروكلوريك وباستخدام طريقة الفقدان بالوزن.تم تحديد أقصى كفاءة تثبيط واكبر جزء من المعدن مغطى بالمثبط حيث بلغت أقصى كفاءة تثبيط 99.5% و 75% و 66% وذلك عند تراكيز من المثبط 1% و 1% و 2% وعند درجات حرارة 25م و 35م و 45م على التوالي. حيث بينت النتائج بأن هذا المستخلص قادر على إيقاف ذوبان الفولاذ الكاربوني وبمدى واسع يعتمد على تركيز المضاف وكذلك زمن التعرض للحامض.. كما أكدت حسابات مساحة السطح المغطى (θ) الاستنتاج السابق. وقد بينت النتائج المستحصلة بأن عملية التثبيط تتم من خلال الأمتزاز الفيزيائي للمكونات الكيميائية للمضاف على سطح الفولاذ الكاربوني. ER -