@Article{, title={The Study of the effect of natural aging on some mechanical properties of (Al-Cu) & (Al-Zn) alloys دراسة تأثيرالتعتيق الطبيعي على بعض خصائص السبيكتينAl-Cu & Al-Zn}, author={Safaa A.S.Almtori صفاء عبد القادرصالح المطوري}, journal={Journal of Basrah Researches (Sciences) مجلة ابحاث البصرة ( العلميات)}, volume={33}, number={1A}, pages={79-86}, year={2007}, abstract={The aim of this study is to notice the effect of natural aging on the new alloys and the evaluation of new Al-alloys which consists of the elements of (Zr) & (Te) with an amount of 0.2% for each additive & its comparison with alloy without additive for abase Al-alloy, then measuring their hardness & ultimate tensile strength :1.As a function of artificial aging temperature at (130oC) and natural aging(15 years) for wrought (Al-Cu) & (Al-Zn) alloys. 2. For corrosion specimen & oxidation specimen at (300 oC) for wrought and cast alloys with & without additive impurities , so noticed that the effect of natural aging for (15) years (MSc specimen project-1992) on wrought specimen (AL-Zn) alloy is clear and has high rate of both hardness & ultimate tensile strength .This is due to natural aging which leads to precipitate impurities .They resist the movement of dislocation due to high stability alloys , high hardness & high tensile strength, for (Al-Zn) wrought alloy is more than (Al-Cu)wrought alloy .So oxidation specimen test for (Al-Cu) specimen shows high hardness & tensile strength for wrought specimen in a comparison of cast specimen due to special thermo-mechanical treatment but corrosion specimen test for(Al-Cu)cast specimen has high hardness & high tensile strength due to the changes in heat treatment . But (Al-Zn) wrought specimen for both oxidation and corrosion tests have hardness & tensile strength which are less than cast specimen for the same alloy.

يهدف البحث الى دراسة تأثير التعتيق الطبيعي(15 سنة,عينات مشروع الماجستير) على سبائك المنيوم- نحاس و المنيوم- زنك المستخدمتين في صناعة الطائرات والمحضرتين سابقا" والمحتويتين على 0,2% من كل من الزركونيوم و التيليريوم وقياس الصلاده و مقاومة الشد كداله للتعتيق الصناعي(130 ْم) و التعتيق الطبيعي(15 سنة) ومقارنتها مع السبائك التي لاتحتوي على الاضافات,كذلك قياس الصلاده و مقاومة الشد للعينات المعرضه للتأكل الرطب والجاف (التأكسد عند 300 ْم) وللسبائك المشكله و المصبوبه, حيث يمكن ملاحظة ان معدلي الصلاده ومقاومة الشد لسبيكه المنيوم- زنك المسبوكه و المشكله اكبرمن سبيكة المنيوم- نحاس ويعزى ذلك لترسب الاضافات مع الشوائب الموجوده في السبيكةالاولى بين الانخلاعات واعاقتها عن الحركه مما ادى الى زيادة الخواص الميكانيكيه المقاسة وجعل السبيكه اكثر استقرارا" للخواص,اما سبيكه المنيوم- نحاس المشكله و المعرضه للتأكسد فنلاحظ ان معدل الصلاده و مقاومة الشد اكبر من قرينتها المسبوكه بسبب المعاملات الميكانو- حراريه للسبائك المشكله.اما سبيكه المنيوم- زنك المشكله و المعرضه للتأكل الرطب و الجاف فلها معدل صلاده و مقاومة شد اقل من السبائك المسبوكه ويعزى ذلك الى اختلاف المعاملات الحراريه بعد السباكه.} }