@Article{, title={Experimental Enhancement of the Thermal Conductivity for Mortar Concrete by Adding Polystyrene}, author={Mohammed Wahhab Aljibory}, journal={University of Thi-Qar Journal for Engineering Sciences مجلة جامعة ذي قار للعلوم الهندسية}, volume={3}, number={2}, pages={103-114}, year={2012}, abstract={This paper gives an experimental study for the thermal conductivity of mortar concrete material by adding polystyrene (styropr) as granules for different volume percentages (0%,5% , 10% and 15 %). Polystyrene considered as a polymeric thermal isolative material. Thespecimens of 343 cm3 are made with a mixing percentages of 22.72% cement, 68.18% sand and 9.1% water which they accredited according to the Iraqi standardization No. (5 /1984).Tests are carried out in the laboratories of the engineering college – Karbalaa university to determine the thermal conductivity, compressive strength, porosity and the density for the specimens. The results showed that the polystyrene leads to decrease the thermalconductivity of the mortar concrete. The thermal conductivity of the (5%) polystyrene specimen is decreased by (2.6%), (10%) polystyrene specimen is decreased by (10.4%), and for the specimen of (15%) polystyrene is decreased by (20.28%)The compressive strength ofthe specimen is decreased by increasing the polystyrene percentages and this clearly appear in the 10% and the 15% specimens but it isn't exceed the permissible range according to the Iraqi standardization No. 5/1984 (compressive strength 23 Mpa).

يعطي هذا البحث دراسة عملية للموصلية الحرارية لمادة الكونكريت (مونة) بإضافة مادة البوليسترين ( الستايروبر) على شكل حبيبات بنسب حجمية مختلفة ( 5% , 10% و 15 %). تعتبر مادة البوليسترين من المواد البوليمرية العازلة . تم تصنيع النماذج وبحجم 343 سم3 وبنسب خلط (22,72%) سمنت , (68,18%) رمل و (9,1%) ماء وحسب المواصفة العراقية (5/1984) مع اضافة المادة العازلة بالنسب اعلاه للخليط.اجريت الفحوصات في مختبرات كلية الهندسة جامعة كربلاء لقياس الموصلية الحرارية, مقاومة الانضغاط, النفاذية, والكثافة للنماذج المصنعة.بينت النتائج ان اضافة مادة البوليسترين ادت الى نقصان الموصلية الحرارية لمادة الكونكريت. ان اضافة حجمية بنسبة (5%) من مادة البوليسترين قللت الموصلية الحرارية بنسبة (2,6%) واضافة (10%) من البوليسترين قللت الموصلية الحرارية بنسبة (10,4%) اما اضافة (15%) من البوليسترين فقد قللت الموصلية الحرارية بنسبة (20,28). لقد لوحظ ان مقاومة الانضغاط تقل بزيادة نسبة المادة المضافة وخصوصا بنسب (10 و 15) % ولكن دون ان تتجاوز الحد المسموح به لمادة الكونكريت وحسب المواصفة العراقية (5/1984) حيث (مقاومة الانضغاط 23 ميغا باسكال).} }