TY - JOUR ID - TI - Control of Corrosion of Copper-Alloy Condenser Tubes by Chemical Treatment السیطرة على تآكل أنابیب مكثفات سبیكة النحاس ةلماعملاب الكیمیائیة AU - Wassan Abduallah AU - Nawal Jassim AU - Qais A.Hassan PY - 2012 VL - 30 IS - 17 SP - 2951 EP - 2965 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - The present work deals with the study of the factors that affect the corrosionresistance and heat transfer resistance of treated condenser tubes by surface filming withferrous sulfate solution. The reduction of corrosion rate on the filmed surfaces wasdetermined under dynamic conditions using weight loss method. The variation of thecorrosion rate at different exposure time and different fluid velocities of the filmingsolution were studied throughout the laboratory corrosion system. While the effect ofsurface filming on depression of heat transfer process in term of increasing the heattransfers resistance was studied throughout the laboratory thermal system. The resultsindicated that the filming solution reduced the corrosion rate of copper alloy to 52.7%,but the heat transfer resistance increased from 12.88 to 18.73*10-4 m2K/W. Moreover, themetallurgical investigation clearly revealed the feature and nature of the film formed onthe metal surface.

البحث الحالي یتعلق بدراسة العوامل المؤثرة على مقاومة التآكل ومقاومة انتقال الحرارة لأنابیب· المكثفات المعاملة بطبقة سطحیة من محلول كبریتات الحدیدوزتم تعیین مقدار التناقص يف معدل التآكل للسطح المعامل تحت ظروف حركیة باستخدام طریقةالفقدان بالوزن كذلك متت دراسة التغیر في معدل التآكل عند أزمان غمرمختلفة وسرع جریان مختلفةكما انتاثیر الطبقة المتكونة على السطح في تقلیل انتقال الحرارة · باستخدام منظومة قیاس التآكل المختبریةبدلاةلزیادة مقاومة انتقال الحرارة قد تمت دراستھ من خلال استخدام المنظومةأظھرت النتائج بأن الطبقة المتكونة على السطح تقلل معدل تآكل سبیكة النحاس · الحراریةالمختبریة18.73x10- ةبسنب 52.7 %,ولكن لوحظ ان تلك الطبقةتزید مقاومة انتقال الحرارة من 12.88 الى 4اضافة الى ذلك أشارت الاختبارات المیتالورجیة بوضوح الى طبیعة وخصائص الغشاء .m2K/W· المتكون على سطح المع ER -