TY - JOUR ID - TI - Theoretical and Experimental Investigation of Fluidic Oscillator AU - Bahaa Aldeen M. Razouqi AU - Ali Abdul AL-Muhsin AL-Asady PY - 2013 VL - 19 IS - 3 SP - 403 EP - 413 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - A symmetric feedback fluidic oscillator design is proposed. Theoretical and experimental studies have been conducted to evaluate the relation between the fluidic feedback oscillator frequency and temperature of the air which is the working substance. Two methods of calculations were used, lumped and distributed parameter system. Then the results obtained experimentally. It was found that the results of the lumped parameter system are closer to experimental results than the distributed parameter system and also give the nonlinearity by (0.915%) between the lumped and experimental results show linear relationship between air temperature and oscillator frequency with a coefficient of determination (0.9977) And also found that the oscillator readings have a margin of error very small amount (0.0011 Hz / Co) as well as a percentage (hysteresis) of about (1.663%) when measuring the temperature and to overcome the hysteresis we suggest the use of fins to get rid of (residual heat), the rig sensitivity was (3.66*10-3 s/Co) finally, the rig resolution was (0.002 s).

تم اقتراح تصميم مذبذب موائعي متناظر في هذا البحث, وقد تم اجراء الدراسات العملية والنظرية لايجاد العلاقة بين تردد المذبذب ودرجة حرارة الهواء الذي يعتبر وسيط العمل وبالتالي استخدام المذبذب كمتحسس لدرجة الحرارة. طريقتان لحساب تردد المذبذب تم استخدامهما, الاولي تعتمد نظام المعايير (lumped) والثانية تعتمد نظام المعايير (distributed), وبعدها تم ايجاد النتائج عمليا. لقد وجد بان طريقة (lumped) تكون نتائجها اكثر واقعية وكذلك اعطت نسبة (nonlinearity) بمقدار (%0.915) بين النتائج العملية والنظرية, وكذلك ووجد بان العلاقة تكون خطية بين تفير درجة الحرارة و تغير مقدار تردد المذبذب وبمعامل تحديد (0.9977).ومن النتائج العملية وجد بان الجهاز له نسبة خطأ بمقدار (0.0011 Hz/Co) بالاضافة الى نسبة (hysteresis) بمقدار (1.663%) ولتقليل هذه النسبة تم اقتراح استخدام زعانف (fins) لتبديد الحرارة (residual heat), وكذلك ووجد ان حساسية الجهاز (sensitivity) تكون بمقدار (3.66*10-3 s/Co), واخيرا كانت نسبة دقة الجهاز (resolution) بمقدار (0.002 s). ER -