TY - JOUR ID - TI - Effect of Low Freque ncy Vibration on The Micro-structure Of The Aluminum Eutectic Alloy تأثير الاهتزازات على طبيعة التجمد ، التركيب المهجري ,والخواص الميكانيكية لسبائك الألمنيوم اليوتكتية AU - سعد رزاق مجيد PY - 2012 VL - 10 IS - 4 SP - 152 EP - 165 JO - journal of kerbala university مجلة جامعة كربلاء SN - 18130410 AB - The effect of low frequency vibration (50cps) on solidification, structure and mechanical properties of aluminum eutectic alloys(Al-33%Cu, Al-11.7%Si )which is casted in pre-heated metallic moulds at different temperatures (200,300,400,500 and 5500C) was carried out in this investigation . The results show that low frequency vibration affect the solidification state , structure type and mechanical properties of the implemented alloys. Eutectic and intermetallic phases were coarsened by low frequency vibration ,the effect of which was found to increase by increasing the preheating temperatures of the metallic moulds .The solidification time is also reduced .Consequently coarsening of the micro-constituents the mechanical properties were lowered , although porosity, ultimate tensile stress(U.T.S) and eutectic cell size were reduced by vibration . The results show that the columnar growth was suppressed and equiaxed grain size were promoted . The fine lamellar structure of the eutectic was degenerated to a coarse irregular one .The effect of casting size on the extent of influence of vibration on structure and related aspects was also observed that ,with the increase in the size of the casting , the effect of the vibration is accentuated . As the preheating temperature of the moulds was increased, grain refinement effect due to vibration decreased and also the mechanical properties considerably decreased .

تم في هذا البحث دراسة تأثير الاهتزازات ذات التردد الواطئ(50cps)على طبيعة التجمد,التركيب المجهري ,والخواص الميكانيكية لسبيكتين يوتكتيتين من سبائك الألمنيوم اليوتكتية (Al-33%Cu)و(Al-11.7%Si) والتي تم قولبتها في قوالب معدنية مسخنة مسبقا لدرجات حرارية مختلفة ( (550,500,400,300,2000 C . أظهرت النتائج أن الصب تحت تأثير الترددات الواطئة يؤثر على طبيعة التجمد وشكل التركيب المجهري والخواص الميكانيكية للألمنيوم النقي و للسبيكتين أعلاه على حد سواء. أن الطورين اليوتكتيكي والمعدني يظهران بشكل خشن ,ويظهر ذلك بصورة واضحة عند استخدام قوالب صب معدنية مسخنة مسبقا , وتزداد خشونة الطورين بزيادة درجة حرارة التسخين المسبقة للقالب المعدني .وكذلك يقل الزمن اللازم للتجمد . وطبقا للتغيير الذي يحصل في التركيب البلوري نجد أن الخواص الميكانيكية تتغير حيث تنخفض مقاومة الشد العظمى (бU.T.S) ويقل حجم الحبيبات للطور اليوتكتيكي وتنخفض النسبة المئوية للمسامية بأستخدام الاهتزازات . كما أظهرت النتائج العملية أن التجمد ألاتجاهي (الشجيري ) يضمحل باستخدام الاهتزازات وتحل محله مستعمرات وبصورة واضحة.وكذلك يتكون التركيب الرقائقي للطور اليوتكتيكي بدلا من خشونته . أن لحجم المصبوبة تأثير على التركيب المجهري ولكن تأثير الاهتزازات يظهر بصورة اكبر . عند زيادة درجة حرارة تسخين القالب المعدني يزداد انتظام الحبيبات البلورية ويقل انتظامها بزيادة الاهتزازات وكذلك تنخفض الخواص الميكانيكية إلى حد كبير . ER -