TY - JOUR ID - TI - Experimental Study of Punching Shear Strength of Self Compacting Concrete Slabs with Openings دراسة عملية لمقاومة القص الثاقب للبلاطات الخرسانية ذاتية الرص ذات الفتحات AU - Zainab Mohammed Ridha Abdul Rasoul PY - 2011 VL - 9 IS - 2 SP - 88 EP - 100 JO - journal of kerbala university مجلة جامعة كربلاء SN - 18130410 AB - The main purpose of this study is to evaluate the effect of punching shear strength on the behavior of self compacting reinforced concrete two-way slab specimens which have different types of openings. Seven slabs were prepared for this matter divided into two groups, group (A) consists of four slabs, one without opening (S1) and three with square openings (S2,S3, and S4) while group (B) consists of three slabs with circle opening (S5,S6, and S7). The different parameters included in this study are; shapes of opening (square opening, circular opening) and position of opening (for punching failure). The constant parameters considered are; concrete type (self compact) and steel reinforcement ratio. Some of conclusions in this study are; the ultimate punching shear strength of the slab with the larger opening is less than that with smaller one and at the edge for square opening, and the ultimate load capacity for slab specimens were decreased significantly when opening existed, so that the slabs in group (A and B)showed decreasing of the original load of slab (S1), of (38.9%, 44.4%, 33.3%, 30.6%, 38.9%, and 44.4%) for slabs: (S2, S3, S4, S5, S6, and S7) specimens respectively .The percentage of reduction depends mainly on size and position of opening.

إن الهدف من هذا البحث هو دراسة تأثير مقاومة القص الثاقب على سلوك نماذج من البلاطات الخرسانية المسلحة ذاتية الرص والتي تحتوي على فتحات مختلفة. إذ يتضمن هذا البحث إجراء فحص على سبع نماذج من البلاطات تم تقسيمها الى مجموعتين , مجموعة (أ) تتضمن أربعة بلاطات واحدة بدون فتحة وثلاثة تحتوي على فتحة مربعة بأماكن وقياسات مختلفة ومجموعة (ب) تحتوي على ثلاث بلاطات ذات فتحات دائرية وبأماكن مختلفة. هنالك عاملان متغيران رئيسيان هما شكل الفتحة وموقع الفتحة بالنسبة للبلاطة أما العاملان الثابتان هما أولاً نوع الخرسانة المستخدمة والتي تتضمن خرسانة ذاتية الرص وثانياً نسبة حديد التسليح. تم تَُحلًل النتائج و رسم منحي التشوه للنماذج ذات الفتحات وقورنت النتائج مع نتائج النموذج الصلد وكذلك سوف تُعرض التشققات الحاصلة في النماذج وكيفية ظهور تأثير القص الثاقب عليها بوضوح. إن بعض الاستنتاجات التي تم التوصل إليه في هذا البحث , 1 : مقاومة القص الثاقب القصوى للبلاطة ذات الفتحة الكبيرة اقل من المقاومة فيما يخص الفتحة الصغيرة والجانبية, 2 : النقصان بسعة الحمل القصوى عند وجود الفتحات بحيث أظهرت البلاطات في المجموعتين (أ,ب) نسبة نقصان (38.9%,44.4%,33.3%,30.6%,38.9%, 44.4%) من الحمل الأصلي للبلاطة الصلدة S1 فيما يتعلق بالبلاطات (S2,S3,S4,S5,S6 and S7) على التوالي. وهذا النقصان يعتمد على حجم وموقع الفتحات ER -