@Article{, title={Pilot study for hydraulic behavior and removal efficiency of mixed media bioreactor دراسة تجريبية للتصرف الهيدروليكي وكفاءة الإزالة لمرشح بيولوجي متعدد الأوساط}, author={ياسر طالب حميد}, journal={Iraqi Journal of Civil Engineering المجلة العراقية للهندسة المدنية}, volume={7}, number={2}, pages={1-15}, year={2012}, abstract={In this paper three material with equal amount have been chosen to make a mixture, these materials are sand (passing sieve no. 1.18, porosity 0.41), activated carbon (passing sieve no. 4.75, porosity 0.51), crushed bricks (passing sieve no. 20, porosity 0.47), the mixture was used as a bio-filtering media , placed to a height of (1.15) m in a cylindrical filter with diameter of (300)mm and a height of (2)m which is designed and constructed from (PVC).The filter is equipped with three piezometers fixed at three point along the height of the cylindrical filter, in addition to three overflows at different height, and an outlet with control valve.On May 2010 the filter was operated with a synthetic wastewater similar to domestic sewage in order to determine the hydraulic and sanitary characteristics of the filter. Then the feeding of waste water was continued for 3 weeks in order to stimulate the growth of bio-film.On June 2010 the filter was operated with gray water to determine the change in filter characteristics after the bio-film growth, and to evaluate filter efficiency to treat this water for the purpose of reuse.The outcome of this work showed that the mixed media bio-filter, to a certain extent, is similar in hydraulic characteristics (pressure drop and hydraulic load) to granular activated carbon bio-filter, head loss at (1000) mm depth is (59%) of initial pressure, the growth of bio-film leads to increase in head loss by (43%), decrease in flow by (25|%), decrease in pressure by (16%).According to removal efficiency of pollutants, the results shows an efficient removal of BOD¬5 (86%), turbidity (96%), TDS (81%) at a retention time (60 minute).

تم في هذا البحث اختيار ثلاث مواد مختلفة وهي الرمل والكاربون المنشط والطابوق المكسر لعمل مزيج من هذه المواد بنسب متساوية، واستخدامه كوسط لعملية الترشيح البيولوجي. تم تصميم وبناء المرشح بارتفاع 2م وقطر 300 ملم ووضعت المادة المرشحة في المرشح الى ارتفاع 1.15 م، جهز المرشح بـ 3 بيزومترات في 3 نقاط ضمن عمود المرشح كما وضع في المرشح 3 فتحات في الاعلى تمثل 3 مطافح للماء للحفاظ على مستوى ثابت اثناء التجربة وفتحة اسفل المرشح مزودة بصمام تمثل مخرج الماء. اجري الأختبار الاول للخصائص الهيدروليكية وكفاءة المعالجة للمرشح في بداية التشغيل في شهر ايار 2010، باستخدام ماء مصنع في المختبر عن طريق اضافة مواد طينية ومواد عضوية وسكر كلوكوز ليصبح مشابها لمياه الفضلات المنزلية.استمرت عملية ادخال مياه الفضلات المصنعة لمدة 3 اسابيع لتشجيع نمو البكتريا على وسط الترشيح، وفي شهر حزيران 2010 اجري الأختبار الثاني للخصائص الهيدروليكية وكفاءة المعالجة للمرشح باستخدام الماء الرمادي لمراقبة التغير بخصائص المرشح بعد نمو الاحياء المجهرية ولتقييم كفاءة المرشح في معالجة هذا النوع من المياه لاغراض اعادة الاستخدام.اثناء تحليل النتائج ومقارنتها وجد ان هناك تقارب بين الخصائص الهيدروليكية (الحمل الهيدروليكي، خسائر الضغط) للمرشح البيولوجي المتعدد الاوساط مع الخصائص الهيدروليكية لمرشح الكربون المنشط الحبيبي البيولوجي، كما وجد ان خسائر الضغط في المرشح عند عمق (1000) ملم تصل الى (59%) من الضغط الابتدائي، وظهر ان نمو البكتريا يؤدي الى هبوط بالضغط كما هو واضح في الاختبار الثاني (شهر حزيران) حيث ان الضغط هبط بنسبة (16%) من الضغط في الاختبار الاول (شهر ايار) وكذلك زادت قيمة (خسائر الضغط /م) بنسبة (43%)، اما بالنسبة للتصريف فيلاحظ ان قيمته قلت بنسبة (25%) في الاختبار الثاني بسبب انسداد الفراغات بالمواد العالقة والنمو البكتيري. اظهرت النتائج كفاءة كبيرة للمرشح لتحسين نوعية الماء حيث بلغت نسبة ازالة المتطلب البيوكيميائي للاوكسجين 86%، نسبة ازالة الكدرة 96% ، نسبة ازالة المواد الصلبة العالقة 81% عند زمن مكوث (60) دقيقة.} }