@Article{, title={Properties of Ferrocement Slabs Containing Sawdust خصائص السقوف الفيروسمنتية الحاوية على نشارة الخشب}, author={د.عزيز إبراهيم عبدالله، استاذ مساعد ياسين علي صالح،مدرس هيفاء مهدي صالح، مدرس}, journal={Tikrit Journal of Engineering Sciences مجلة تكريت للعلوم الهندسية}, volume={20}, number={1}, pages={51-63}, year={2013}, abstract={This research included the study of influence of sawdust addition on the properties of mortar and ferrocement slabs and study the influence of treatment sawdust on the static and dynamic properties of the Sawdust Ferrocement Slabs (SFS). In the present work, addition a different sawdust percentages ranged between (10% to 50%) of the volume of fine aggregate to cement mortar and superplasticizer was used to increase compressive strength and workability of cement mortar. The tests include, samples of cubes and prisms were tested for compressive strength and modulus of rapture and calculated the thermal conductivity for Sawdust Cement Mortar(SCM). The results show a significant improvement in the properties of cement mortar in terms of thermal insulation, the values of thermal conductivity ranged between (0.54 to 0.31) W/(m.K) ) to the ratio mixes respectively. While for the ferrocement mix without any sawdust ratio up to 0.65 W/(m.K) and this mean an improvement in the performance of mixtures of thermal insulation by 17% to 52%. The best sawdust ratio for the compressive strength is 30% where the value of thermal conductivity then is 0.38 W/(m.K) and the value of compressive strength of (29 Mpa). Also Sawdust Ferrocement Slabs (SFS) (treated and untreated) were cast and tested under static and dynamic loads effect. The results show a good improvement in the mechanical properties of (SFS) under these loads.

يتضمن هذا البحث دراسة مدى تاثير اضافة نشارة الخشب المعالجة بمادة الدملوك وغير المعالجة على خصائص مونة الاسمنت وخصائص السقوف الفيروسمنتية تحت تاثير الاحمال الساكنة والحركية.تم في هذا البحث إضافة نشارة الخشب بنسب مختلفة (10 الى 50 %) من حجم الركام الناعم إلى مونة الاسمنت. كما تم استخدام ملدن فائق لغرض زيادة مقاومة وقابلية تشغيل مونة الاسمنت. تم اجراء فحص مقاومة الانضغاط ومعاير الكسر لمكعبات ومواشير مونة الاسمنت كما تم حساب معامل التوصيل الحراري لمونة الاسمنت النشارية.أظهرت النتائج بصورة عامة تحسن كبير لأداء الخلطات المستخدمة من ناحية العزل الحراري حيث تراوحت قيم ألموصليه الحرارية من 0.54 إلى 0.31 واط / (م.كلفن) لنسب الخلط المذكورة أعلاه, بينما كانت بالنسبة للخلطة ألمرجعيه قبل إضافة نشارة الخشب بحدود 0.65 واط / (م.كلفن) وهذا يعني تحسن في أداء الخلطات للعزل الحراري بنسبة 17% إلى 52% وان أفضل نسبة إضافة لنشارة الخشب هي 30% والتي اعطت مقاومة انضغاط عالية وموصلية منخفضة حيث كانت قيمة الموصليه الحرارية عندها هي 0.38 واط / (م.كلفن ) وقيمة مقاومة انضغاط جيدة. كما تم صب سقوف فيروسمنتية تحتوي على نشارة الخشب المعالجة وغير المعالجة وتم فحص هذه السقوف تحت تاثير الاحمال الحركية والساكنة. اظهرت النتائج تحسنا كبيرا في تصرف السقوف الفيروسمنتية النشارية تحت الاحمال الساكنة والحركية حيث تزداد المتانة والمطيلية.} }