@Article{, title={Effect of Water on Bending Strength for Epoxy Reinforced with Particles by Using Cantilever Bending Test تأثير الماء على متانة الأنحناء للايبوكسي المدعم بالجسيمات بأستخدام أختبار الأنحناء للعارضة المثبتة من طرف واحد}, author={Mohammed Ghazi Hammed محمد غازي حمد}, journal={Anbar Journal of Engineering Sciences مجلة الأنبار للعلوم الهندسية}, volume={المؤتمر الهندسي الأول لكلية الهندسة}, number={العدد الخاص - الجزء الأول}, pages={39-51}, year={2012}, abstract={This research includes the study of bending strength for the polymer composite materials. The first of all, the hand lay-up technology is used to prepare slates of the composite materials, epoxy resin was used as matrix for the reinforced materials that consist of artificial powders (aluminum oxide and copper) for reinforcing. The slates made of composite materials for both volume fractions 20% and 40% from the reinforced materials; all these slates were cut into samples with measurement (10x 100 mm) in order to carry out the bending strength test for samples by using cantilever bending test for both volume fractions 20% and 40%. The results and laboratory examinations for these samples shows increase in the bending strength and modulus of elasticity for composite materials when the volume fraction increase from 20% to 40% for reinforced materials, and these values decrease when the samples were immersion in distilled water for (30) days.

تضمن هذا البحث دراسة متانة الأنحناء للمواد المتراكبة البوليمرية المسلحة بالجسيمات. أستخدمت تقنية التصنيع اليدوي في تصنيع ألواح من المواد المتراكبة, حيث استخدم راتنج الايبوكسي كمادة رابطة لمواد التسليح والمتكونة من مسحوقي أوكسيد الألمنيوم والنحاس. صنعت ألواح من المواد المتراكبة بكسرين حجميين 20% و 40% من مواد التسليح وكل هذه الألواح تم تقطيعها إلى عينات بالقياسات (10x100 ملم) لكي يتم بعد ذلك إجراء اختبار متانة الأنحناء للعينات بأستخدام أختبار الأنحناء للعارضة المثبتة من طرف واحد ولكلا الكسرين الحجميين 20% و 40%. أظهرت النتائج والاختبارات المختبرية لهذه العينات إن هناك زيادة في متانة الأنحناء ومعامل المرونة عند زيادة الكسر الحجمي لمواد التسليح من 20% إلى 40% وان هذه القيم تتناقص عند غمر العينات بالماء المقطر لمدة (30) يوما.} }