@Article{, title={Creep Behavior in Fiber-Reinforced Epoxy (DGEBA) Composites خاصیة الزحف في الألیاف المدعم بمتركبات الایبوكسي}, author={Lubna Ghalib}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={31}, number={1 Part (A) Engineering}, pages={12-25}, year={2013}, abstract={The composite material was prepared by reinforcing the epoxy with E-glass fiber. The creep and flextural test were measured in this work for one and two layer of E-glass fiber with volume fraction rate of (10%, 20%, 30%, and 40%) in orientation of (0-90o) immersed in epoxy (DGEBA) resin with total thickness of 4mm. The tests were done at different temperature levels from (25 to 55)Co for creep test. The results had revaluated showing that the creeping properties of this composite materials will be improved with increasing the volume fraction layer of fiber at different temperature levels with constant stress. Creeping increases when the temperature increases and decreases with increasing of the number of layers and volume fraction of fiber. The creep constant increases with increasing the temperature up to 45Co then the creep constant down. The creeping energy of epoxy E-glass (epoxy composite) increases with increasing the volume fraction rate of E-glass fiber.

إن المواد المتراكبة تحضر بتقوية مادة الايبوكسي بالألياف الزجاجية نوع E)) . تجربة الزحف و الانحناء تم قياسها في هذا البحث لطبقة وطبقتين من الألياف الزجاجية نوع (E) وبنسبة حجميه (10%, 20%, 30%, 40%) وباتجاه (0°-90°)مغمورة في الايبوكسي DGEBA) ) وبسمك إجمالي قدره (4 ملم).تم أجراء اختبارات الزحف في درجات حرارة مختلفة تراوحت مابين (25-55) م° . أظهرت النتائج بعد إن تم تقييمها من إن خواص الزحف لمثل هذه المواد المتراكبة قد تحسنت بزيادة النسبة الحجمية لطبقة الألياف الزجاجية عند مختلف درجات الحرارة وتحت إجهاد ثابت.أظهرت النتائج إن الزحف يزداد عندما تزداد درجة الحرارة ،وكذلك فان الزحف يقل بزيادة عدد طبقات الألياف وكمياتها . إن ثابت الزحف يزداد بزيادة درجة الحرارة ولحد (45 م° ) وبعدها يقل ثابت الزحف ،حيث إن طاقة الزحف للايبوكسي المقوى بالألياف الزجاجية عندها يزداد بزيادة النسبة الحجمية للألياف الزجاجية.} }