TY - JOUR ID - TI - Predict of residual stress behavior in aluminum friction stir welding by Leeb hardness method AU - Kadhim Kamil Resan PY - 2013 VL - 17 IS - 1 SP - 233 EP - 241 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - The friction stir welding method it is a modern methods for non- welding material using a milling machine and rotary pin, as a result of heat generated due to rotation of the pin, it generates stresses inherent and it is necessary to know the behavior or the value of these stresses. In this research a new method were invented to predict the behavior of the residual stresses . Three models of friction welding samples are designed at different rotating speed ( 1500 rpm , 1000 rpm and 800 rpm) , then drawing a grid on each sample was drawn vertically and horizontally lines with spaces of 10 mm and 5 mm respectively for each line, Leeb hardness were measured in each node .It found that the hardness is low in the line of welding and then increased at 5-mm ,decreasing at 10 mm then another increase at 15 mm, these change in the value of hardness indicate a change of residual stresses value

طريقة اللحام الاحتكاكي من الطرق الحديثة نسبيا و التي تسخدم للحام المواد غير القابلة للحام مثل الألمنيوم باستخدام ماكنة التفريز و التحكم بالسرع الدورانية للقلم .و نتيجة الحرارة المتولدة بسبب دوران القلم فان ذلك يولد اجهادات كامنة ومن الضروري معرفة سلوك او قيمة تلك الاجهادات , في هذا البحث تم ابتكار طريقة جديدة للتنبأ بسلوك تلك الاجهادات الكامنة باعتماد الصلادة Leeb حيث ان قيمة الصلادة تشير الى اجهادات اما شدية او انضغاطية في العينة .تم تصنيع ثلاث نماذج من عينات اللحام الاحتكاكي باستخدام سرع دوران مختلفة: 1500 دورة بالدقيقة و 1000 دورة بالدقيقة و 800 دورة بالدقيقة . بعدها تم رسم شبكة على كل عينة على شكل خطوط توازي خط اللحام و خطوط عمودية على خط اللحام و بمسافات 10 ملم و 5 ملم على التوالي , وتم قياس صلادة نوع Leeb في كل عقدة و من خلال تلك القيم تم الحصول على سلوك الاجهادات الكامنة حيث كانت الصلادة منخفضة في خط اللحام ثم تزداد عند 5 ملم لتعود بالانخفاض عند 10 ملم و ترتفع عند 15 ملم . ان هذا التغير بقيمة الصلادة هو مؤشر لتغيير قيمة الاجهادات الكامنة ER -