@Article{, title={Thermal Performance of Film Cooling for Two Staggered Rows of Circular Jet ألأداء الحراري لغشاء التبريد لصفين من النفاثات الدائرية المتعرجة}, author={Assim H. Yousif and Amer M. Al-Dabagh and Muwafag Sh. Alwan}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={31}, number={1 Part (A) Engineering}, pages={66-80}, year={2013}, abstract={The holes orientation and jet inclination angles are important parameters that control the development of the flow structures and the penetration and spreading of the jets. Experimental investigations that describe the film cooling performance for a two rows of staggered holes with opposite orientation angles are presented to determine the heat transfer coefficient and film effectiveness under different holes attitude. Experimentalin vestigations were done on a flat plate by using a single test transient IR thermograph technique. The attitude of the downstream row holes is fixed at inclination angle (θ=30°) and orientation angle of (Ɣ=0°), while the upstream row holes is fixed with opposite orientation angle (Ɣ=180°) and the inclination angles are changed three times as (θ=20°, 30°, and40°). Three different blowing ratios (BR) =0.5, 1.0, and 1.5 are used in experimental program at each case. Enhancements were observed, in which as theblowing ratio increased and the inclination angle of upstream row decreased, the film cooling effectiveness and heat transfer coefficient are increased.

أن زوايا الأتجاه والميل لثقوب النفث من المعالم المهمة المؤثره على بنية وتداخل وأنتشار النفاثات. لحساب معامل أنتقال الحراره وفعالية غشاء التبريد, تم أجراء تجارب عمليه لصفين من الفتحات المتعرجه الترتيب لزوايا أتجاه وميل مختلفه ولنسب نفخ متنوعه. وقد تم أجراء التجارب بأستخدام تقنية الصوره الحراريه دون الحمراءIR)) على صفيحه مستويه بألية الفحص الأنتقالي الواحد.حيث تم تثبيت زاوية الميل بمقدار 30º وزاوية الأتجاه بمقدار 0º بالنسبه للصف النازل(downstream) , بينما تم تثبيت زاوية الأتجاه للثقوب في صف الصاعد(upstream) بمقدار 180º وتغيير زاوية الميلان ثلاث مرات هي:40º, 30º, 20º ,ولكل حاله من الحالات تم أستخدام ثلاث قيملنسب النفخ وهي (BR=0.5, 1.0, 1.5).. أظهرت النتائج أن تقليل زاوية الميل للثقوب في الصف الصاعد وزيادة نسب النفخ أدت الى زيادة فعالية غشاء التبريد ومعامل أنتقال الحراره.} }