TY - JOUR ID - TI - Study the Mechanical Properties of Polyethylene Reinforced by Metal Woven Fibers دراسة الخواص الميكانيكية لمادة البولي ايثيلين المقواة بالياف المعادن المنسوجة AU - Muayad Abdulhasan M.Ali مؤيد عبد الحسن AU - Abbas Ali Diwan عباس علي ديوان PY - 2012 VL - 4 IS - 1 SP - 125 EP - 135 JO - KUFA JOURNAL OF ENGINEERING مجلة الكوفة الهندسية SN - 20715528 25230018 AB - Strength and Durability of fiber reinforced polymer composites (FRP) are controlled by the durability of their constituents: reinforcement fibers, resin matrices, and the status of interfaces. A great deal of research has been focused on the relationship of fibers with matrix, on the other hand, the diameter of the fiber and properties of fiber-matrix composites. The present investigation aims to study the effects of adding steel woven fibers to polymer (polyethylene) on some mechanical properties for resulting composite materials.This research tries to study the using of metal woven fibers as a reinforcement Material with Matrix from polyethylene grades (LDPE,LLDPE) as a composite material that was prepared using an injection molding process at 180- 200 Co and 60 rpm with different diameter (0.25- 1.0 mm).the results show that the tensile strength will slightly increase with percentage about (9%-18%) for the LLDPE and LDPE polymer composite respectively, and tensile modulus will significant increase about (80%- 190%) with woven metal fibers .The ductility is decrease with 68% for LDPE but it was 78% for LLDPE . The flexural strength will decrease with percentage about (36%-22%) for the LLDPE and LDPE polymer composite and impact strength with percentage about (78%-68%) and impact strength about (47%-40%) for the LLDPE and LDPE polymer composite respectively.

إن مقاومة ومتانة المواد المتراكبة البوليمرية المقواة بالألياف (FRP) يتم التحكم بها من خلال المواد المكونة لها ,ألياف التقوية , المادة الأساس البوليمرية وحالة السطح البيني . ان البحث يركز على علاقة الألياف بالمادة الأساس من جهة وقطر الليف من جهة أخرى وخواص متراكب الليف-الأساس . يهدف البحث الحالي إلى دراسة تأثيرإضافة ألياف الفولاذ إلى البوليمرات (البولي اثلين) على بعض الخواص الميكانيكية للمادة المركبة الناتجة.تم في هذا البحث دراسة استخدام ألياف معدنيةمحاكة كمادة تقوية مع أنواع مختلفة مادة الأساس من البولي اثلين(LDPE,LLDPE) وهذه المادة المتراكبة يتم إعدادها باستخدام طريقة القولبة بالحقن عند درجات حرارة بين 180-200 درجة سيليزية وبسرعة دوران تساوي (60) دورة بالدقيقة وبأقطار مختلفة تتراوح (0.25-1.0) ملم , حيث أظهرت النتائج بان قوة الشد تزداد بشكل قليل وبنسبة مئوية (9%-18%) للمادة المتراكبة من البولي اثلين الواطئ الكثافة والبولي اثلين بالتعاقب ،و معامل المرونة الشد قد ازدادت بشكل واضح وبنسبة مئوية (80%- 190%)، بينما انخفضت كل من مقاومة الصدمة بنسبة) (36%-22%والمطيلية بنسبة 78%-68%) ) ومقاومة الصدمة بنسبة (47%-40%)للمادة المتراكبة من البولي اثلين الواطئ الكثافة والبولي اثلين بالتعاقب. ER -